Hi Dillon On 4/9/21 9:28 AM, [email protected] wrote: > From: dillon min <[email protected]> > > Some instances are missing in current support of stm32h743 MCU. This commit > adds usart3/uart4 and sdmmc2 support. > > Signed-off-by: dillon min <[email protected]> > Reviewed-by: Patrice Chotard <[email protected]> > --- > v5: no changes > > arch/arm/dts/stm32h743.dtsi | 30 ++++++++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > > diff --git a/arch/arm/dts/stm32h743.dtsi b/arch/arm/dts/stm32h743.dtsi > index 8c96698..77a8aef 100644 > --- a/arch/arm/dts/stm32h743.dtsi > +++ b/arch/arm/dts/stm32h743.dtsi > @@ -99,6 +99,22 @@ > clocks = <&rcc USART2_CK>; > }; > > + usart3: serial@40004800 { > + compatible = "st,stm32h7-uart"; > + reg = <0x40004800 0x400>; > + interrupts = <39>; > + status = "disabled"; > + clocks = <&rcc USART3_CK>; > + }; > + > + uart4: serial@40004c00 { > + compatible = "st,stm32h7-uart"; > + reg = <0x40004c00 0x400>; > + interrupts = <52>; > + status = "disabled"; > + clocks = <&rcc UART4_CK>; > + }; > + > i2c1: i2c@40005400 { > compatible = "st,stm32f7-i2c"; > #address-cells = <1>; > @@ -332,6 +348,20 @@ > max-frequency = <120000000>; > }; > > + sdmmc2: sdmmc@48022400 { > + compatible = "arm,pl18x", "arm,primecell"; > + arm,primecell-periphid = <0x10153180>; > + reg = <0x48022400 0x400>; > + interrupts = <124>; > + interrupt-names = "cmd_irq"; > + clocks = <&rcc SDMMC2_CK>; > + clock-names = "apb_pclk"; > + resets = <&rcc STM32H7_AHB2_RESET(SDMMC2)>; > + cap-sd-highspeed; > + cap-mmc-highspeed; > + max-frequency = <120000000>; > + }; > + > exti: interrupt-controller@58000000 { > compatible = "st,stm32h7-exti"; > interrupt-controller; >
Applied to u-boot-stm/master Thanks Patrice
