On Mon, Apr 12, 2021 at 2:53 PM Peng Fan (OSS) <[email protected]> wrote:
>
> From: Peng Fan <[email protected]>
>
> Support i.MX8ULP in fec_mxc
>
> Signed-off-by: Peng Fan <[email protected]>
> ---
> drivers/net/Kconfig | 2 +-
> drivers/net/fec_mxc.c | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
> index cf062fad4d..a443b499ba 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -314,7 +314,7 @@ config FEC_MXC_MDIO_BASE
>
> config FEC_MXC
> bool "FEC Ethernet controller"
> - depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || VF610
> + depends on MX28 || MX5 || MX6 || MX7 || IMX8 || IMX8M || IMX8ULP ||
> VF610
> help
> This driver supports the 10/100 Fast Ethernet controller for
> NXP i.MX processors.
> diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
> index ec21157d71..57ba856915 100644
> --- a/drivers/net/fec_mxc.c
> +++ b/drivers/net/fec_mxc.c
> @@ -628,7 +628,7 @@ static int fec_init(struct eth_device *dev, struct
> bd_info *bd)
> writel(0x00000000, &fec->eth->gaddr2);
>
> /* Do not access reserved register */
> - if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m()) {
> + if (!is_mx6ul() && !is_mx6ull() && !is_imx8() && !is_imx8m() &&
> !is_imx8ulp()) {
> /* clear MIB RAM */
> for (i = mib_ptr; i <= mib_ptr + 0xfc; i += 4)
> writel(0, i);
> --
> 2.30.0
>
Reviewed-by: Ramon Fried <[email protected]>
