ping?
On Wed, Feb 24, 2021 at 10:55:07PM +0100, Reinoud Zandijk wrote: > Dear Heinrich, > > On Wed, Feb 24, 2021 at 06:57:08PM +0100, Heinrich Schuchardt wrote: > > On 24.02.21 17:44, Reinoud Zandijk wrote: > > > > > > Fixes IDE issues found on the Malta board under Qemu: > > > > > > 1) DMA implied commands were sent to the controller in stead of the PIO > > > variants. The rest of the code is DMA free and written for PIO operation. > > > > > > 2) direct pointer access was used to read and write the registers instead > > > of the inb/inw/outb/outw functions/macros. Registers don't have to be > > > memory mapped and ATA_CURR_BASE() does not have to return an offset from > > > address zero. > > > > > > 3) Endian isues in ide_ident() and reading/writing data in general. Names > > > were corrupted and sizes misreported. > > > > It is preferable to have each issue fixed in a separate patch. > > They are related; 2 and 3 are really one and 1 could in theory be separate but > it won't work on its own. > > > > Tested malta_defconfig and maltael_defconfig to work again in Qemu. > > > > What about the other architectures which can use the driver? > > As for testing, I compile tested an ARM board, edminiv2, successfully, but > don't know how to invoke qemu for it. As for running the tests, my setup is > not capable of running the tests since they seem to be for linux only. > > Does the automatic testing check if disks are indeed found correctly and > checking reading or writing to a disk image? > > With regards, > Reinoud
