On Tue, Apr 20, 2021 at 7:05 AM Toshifumi NISHINAGA <tnishinaga....@gmail.com> wrote: > > Hello all. > > I will add rpi_3_32b_plus_defconfig to easy to build u-boot for > Raspberry Pi 3B+(32bit).
What does this provide over rpi_3_32b_defconfig? As that config works just fine on all variants of the RPi3 inc the B, B+, A+ and CM3 I don't see the point in confusing things with an unnecessary config. > Could you merge this patch? > > Thanks, > Toshifumi NISHINAGA > > > From 28d13f48761ab7c137a5fdf07c76a857967e3590 Mon Sep 17 00:00:00 2001 > From: Toshifumi NISHINAGA <tnishinaga....@gmail.com> > Date: Thu, 15 Apr 2021 16:53:33 +0900 > Subject: [PATCH] Add support for Raspberry Pi 3B+(32bit) > MIME-Version: 1.0 > Content-Type: text/plain; charset=UTF-8 > Content-Transfer-Encoding: 8bit > > It also boots on Raspberry Pi 3B+ using rpi_3_32b_defconfig, > but the network card doesn't work. > > This defconfig is based on rpi_3_32b_defconfig. > > Signed-off-by: Toshifumi NISHINAGA <tnishinaga....@gmail.com> > --- > > configs/rpi_3_32b_plus_defconfig | 46 ++++++++++++++++++++++++++++++++ > 1 file changed, 46 insertions(+) > create mode 100644 configs/rpi_3_32b_plus_defconfig > > diff --git a/configs/rpi_3_32b_plus_defconfig > b/configs/rpi_3_32b_plus_defconfig > new file mode 100644 > index 0000000000..d147a46ae7 > --- /dev/null > +++ b/configs/rpi_3_32b_plus_defconfig > @@ -0,0 +1,46 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_CPU_INIT=y > +CONFIG_ARCH_BCM283X=y > +CONFIG_SYS_TEXT_BASE=0x00008000 > +CONFIG_TARGET_RPI_3_32B=y > +CONFIG_SYS_MALLOC_F_LEN=0x2000 > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_ENV_SIZE=0x4000 > +CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b-plus" > +CONFIG_DISTRO_DEFAULTS=y > +CONFIG_OF_BOARD_SETUP=y > +CONFIG_USE_PREBOOT=y > +# CONFIG_DISPLAY_CPUINFO is not set > +# CONFIG_DISPLAY_BOARDINFO is not set > +CONFIG_MISC_INIT_R=y > +CONFIG_SYS_PROMPT="U-Boot> " > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_MMC=y > +CONFIG_CMD_USB=y > +CONFIG_CMD_FS_UUID=y > +CONFIG_OF_EMBED=y > +CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" > +CONFIG_SYS_RELOC_GD_ENV_ADDR=y > +CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y > +CONFIG_DM_MMC=y > +CONFIG_MMC_SDHCI=y > +CONFIG_MMC_SDHCI_BCM2835=y > +CONFIG_PHYLIB=y > +CONFIG_DM_ETH=y > +CONFIG_PINCTRL=y > +# CONFIG_PINCTRL_GENERIC is not set > +# CONFIG_REQUIRE_SERIAL_CONSOLE is not set > +CONFIG_USB=y > +CONFIG_DM_USB=y > +CONFIG_USB_DWC2=y > +CONFIG_USB_KEYBOARD=y > +CONFIG_USB_HOST_ETHER=y > +CONFIG_USB_ETHER_LAN78XX=y > +CONFIG_USB_ETHER_SMSC95XX=y > +CONFIG_DM_VIDEO=y > +# CONFIG_VIDEO_BPP8 is not set > +# CONFIG_VIDEO_BPP16 is not set > +CONFIG_SYS_WHITE_ON_BLACK=y > +CONFIG_CONSOLE_SCROLL_LINES=10 > +CONFIG_PHYS_TO_BUS=y > +CONFIG_OF_LIBFDT_OVERLAY=y > -- > 2.24.3 (Apple Git-128)