From: Jernej Skrabec <jernej.skra...@siol.net>

There is no real need to read source_id at probe time. It also doesn't
make sense to store it in driver private data since it's already stored
in class platform data. While this looks like cleanup (and it is), it's
also important for DE2 driver rework because this info will be filled
later (after probe is already executed).

Signed-off-by: Jernej Skrabec <jernej.skra...@siol.net>
Reviewed-by: Andre Przywara <andre.przyw...@arm.com>
Signed-off-by: Andre Przywara <andre.przyw...@arm.com>
---
 drivers/video/sunxi/sunxi_dw_hdmi.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/video/sunxi/sunxi_dw_hdmi.c 
b/drivers/video/sunxi/sunxi_dw_hdmi.c
index 6d2bc206fc2..19ed80b48a4 100644
--- a/drivers/video/sunxi/sunxi_dw_hdmi.c
+++ b/drivers/video/sunxi/sunxi_dw_hdmi.c
@@ -20,7 +20,6 @@
 
 struct sunxi_dw_hdmi_priv {
        struct dw_hdmi hdmi;
-       int mux;
 };
 
 struct sunxi_hdmi_phy {
@@ -294,6 +293,7 @@ static int sunxi_dw_hdmi_enable(struct udevice *dev, int 
panel_bpp,
 {
        struct sunxi_hdmi_phy * const phy =
                (struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
+       struct display_plat *uc_plat = dev_get_uclass_plat(dev);
        struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
        int ret;
 
@@ -301,7 +301,7 @@ static int sunxi_dw_hdmi_enable(struct udevice *dev, int 
panel_bpp,
        if (ret)
                return ret;
 
-       sunxi_dw_hdmi_lcdc_init(priv->mux, edid, panel_bpp);
+       sunxi_dw_hdmi_lcdc_init(uc_plat->source_id, edid, panel_bpp);
 
        if (edid->flags & DISPLAY_FLAGS_VSYNC_LOW)
                setbits_le32(&phy->pol, 0x200);
@@ -324,7 +324,6 @@ static int sunxi_dw_hdmi_enable(struct udevice *dev, int 
panel_bpp,
 
 static int sunxi_dw_hdmi_probe(struct udevice *dev)
 {
-       struct display_plat *uc_plat = dev_get_uclass_plat(dev);
        struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
        struct sunxi_ccm_reg * const ccm =
                (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
@@ -353,7 +352,6 @@ static int sunxi_dw_hdmi_probe(struct udevice *dev)
        priv->hdmi.i2c_clk_low = 0xfe;
        priv->hdmi.reg_io_width = 1;
        priv->hdmi.phy_set = sunxi_dw_hdmi_phy_cfg;
-       priv->mux = uc_plat->source_id;
 
        ret = dw_hdmi_phy_wait_for_hpd(&priv->hdmi);
        if (ret < 0) {
-- 
2.17.5

Reply via email to