On Wed, 2010-10-20 at 21:57 +0200, Wolfgang Denk wrote: > Dear Peter Tyser, > > In message <[email protected]> you wrote: > > From: John Schmoller <[email protected]> > > > > Add a new 'pci enum' command which re-enumerates the PCI buses. This > > command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful > > in boards with FPGAs connected via PCI/PCIe, boards that support PCI > > hot-plugging, or during PCI debug. > > > > Also enable the 'pci enum' command for X-ES's Freescale-based boards. > > > > Signed-off-by: John Schmoller <[email protected]> > > Signed-off-by: Peter Tyser <[email protected]> > > --- > > common/cmd_pci.c | 13 +++++++++++++ > > drivers/pci/fsl_pci_init.c | 3 +++ > > drivers/pci/pci.c | 4 +++- > > include/configs/XPEDITE5170.h | 1 + > > include/configs/XPEDITE5200.h | 1 + > > include/configs/XPEDITE5370.h | 1 + > > include/configs/XPEDITE5500.h | 1 + > > 7 files changed, 23 insertions(+), 1 deletions(-) > > Acked-by: Wolfgang Denk <[email protected]> > > Peter, I tried to apply, but I cannot: > > Applying: pci: Add ability to re-enumerate PCI buses > fatal: sha1 information is lacking or useless (include/configs/XPEDITE5170.h). > Repository lacks necessary blobs to fall back on 3-way merge. > Cannot fall back to three-way merge. > Patch failed at 0001 pci: Add ability to re-enumerate PCI buses
I'll rebase and resubmit with your ack and let Kumar pick it up since it touches some 85xx board config files which get moved in the series. Thanks, Peter _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
