On Wed, May 12, 2021 at 7:18 PM Stefan Roese <[email protected]> wrote: > > Currently, building U-Boot for x530 fails since the SPL image is too > big.
Currently? It's working for me on master. Are there upcoming mvebu changes that push us over the limit? > This patch reduces the SPL size by changing the following Kconfig > options: > > Enable CONFIG_SPL_TINY_MEMSET > Disable CONFIG_SPI_FLASH_BAR > > By disabling CONFIG_SPI_FLASH_BAR, the tiny SPI NOR framework can be > used. I've got a nagging feeling I needed CONFIG_SPI_FLASH_BAR for some reason. Possibly for some alternate part we were looking at, on the other hand it could also be from the db88f6820-amc board which I based the initial defconfig on. Looking at what CONFIG_SPI_FLASH_BAR does I think we should be safe. We only fit 16MiB parts and aren't likely to start fitting bigger parts unless all the spi-nor vendors decide to stop making ones <16MiB. > > Signed-off-by: Stefan Roese <[email protected]> > Cc: Chris Packham <[email protected]> > Cc: Pratyush Yadav <[email protected]> > Cc: Tom Rini <[email protected]> Tested-by: Chris Packham <[email protected]> (yes I'm mixing work and personal email addresses. I can re-send tomorrow from the office if that's a concern). > --- > configs/x530_defconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/configs/x530_defconfig b/configs/x530_defconfig > index 890c94b5c1fe..76574c4de4be 100644 > --- a/configs/x530_defconfig > +++ b/configs/x530_defconfig > @@ -62,7 +62,6 @@ CONFIG_SYS_NAND_USE_FLASH_BBT=y > CONFIG_NAND_PXA3XX=y > CONFIG_SF_DEFAULT_BUS=1 > CONFIG_SF_DEFAULT_SPEED=50000000 > -CONFIG_SPI_FLASH_BAR=y > CONFIG_SPI_FLASH_MACRONIX=y > CONFIG_SPI_FLASH_STMICRO=y > CONFIG_SPI_FLASH_SST=y > @@ -84,3 +83,4 @@ CONFIG_USB_ETHER_ASIX=y > CONFIG_USB_ETHER_ASIX88179=y > CONFIG_WDT=y > CONFIG_WDT_ORION=y > +CONFIG_SPL_TINY_MEMSET=y > -- > 2.31.1 >
