Hi Sorry I have already solved ;)
On Wed, May 12, 2021 at 6:07 PM Michael Nazzareno Trimarchi <[email protected]> wrote: > > Hi all > > I have this sequence > > U-Boot SPL 2020.04-5.4.70-2.3.2+g8991308b4b (May 12 2021 - 12:44:10 +0000) > spl_init > power_bd71837_init > DDRINFO: start DRAM init > DDRINFO: DRAM rate 1600MTS > DDRINFO:ddrphy calibration done > DDRINFO: ddrmix config done > >>SPL: board_init_r() > Normal Boot > Trying to boot from BOOTROM > Find FIT header 0x&4403c1a0, size 1047 > Need continue download 1024 > fit read sector 4403c1a0, sectors=1048, dst=401ffb80, count=1048, size=0x418 > firmware: 'uboot@1' > External data: dst=40200000, offset=3000, size=a1010 > fdt: 'fdt@1' > External data: dst=402a1040, offset=a4010, size=6b20 > loadables: 'atf@1' > External data: dst=960000, offset=aab30, size=b1b0 > loadables: 'tee@1' > External data: dst=48000000, offset=b5ce0, size=203e70 > no string for index 2 > Download 2856176, total fit 2857808 > fit read sector 4403c1a0, sectors=1048, dst=401ffb80, count=1048, size=0x418 > firmware: 'uboot@1' > External data: dst=40200000, offset=3000, size=a1010 > fdt: 'fdt@1' > External data: dst=402a1040, offset=a4010, size=6b20 > loadables: 'atf@1' > External data: dst=960000, offset=aab30, size=b1b0 > loadables: 'tee@1' > External data: dst=48000000, offset=b5ce0, size=203e70 > no string for index 2 > Jumping to U-Boot > loaded - jumping to U-Boot... > image entry point: 0x960000 > > I need to move some components to fit on 256Mb but I would like to > know if I can get to atf and atf is running or not. During this time I > need to use the same uart > of the spl but I don't find any debug printing in the code (imx-atf). > Can someone has some experience? > > Michael -- Michael Nazzareno Trimarchi Amarula Solutions Corporate CEO Co-Founder Cruquiuskade 47 Amsterdam 1018 AM NL T. +31(0)851119172 M. +39(0)3479132170 [`as] https://www.amarulasolutions.com
