st 12. 5. 2021 v 14:35 odesÃlatel Michal Simek <michal.si...@xilinx.com> napsal:
>
> From: T Karthik Reddy <t.karthik.re...@xilinx.com>
>
> U-Boot expects to be linked to a specific hard-coded address and to
> be loaded to and run from that address. CONFIG_POSITION_INDEPENDENT
> config lifts that restriction & allowing the code to be loaded to
> and executed from almost any address.
>
> As we enabled CONFIG_POSITION_INDEPENDENT, CONFIG_INIT_SP_RELATIVE
> is enabled by default, where it will set the early stack pointer at
> runtime by adding an offset value to &_bss_start. The offset value
> is taken from SYS_INIT_SP_BSS_OFFSET.
>
> SYS_INIT_SP_BSS_OFFSET offset should be large enough so that the
> early malloc region, global data (gd), and early stack should fit.
> With commit d8fabcc424bd ("arm64: versal: Increase SYS_MALLOC_F_LEN")
> SYS_MALLOC_F_LEN is increased from 32KB to 1MB, so we need to
> accommodate this space with SYS_INIT_SP_BSS_OFFSET. Hence increasing
> SYS_INIT_SP_BSS_OFFSET to 1.5MB.
>
> Signed-off-by: T Karthik Reddy <t.karthik.re...@xilinx.com>
> Acked-by: Ashok Reddy Soma <ashok.reddy.s...@xilinx.com>
> Signed-off-by: Michal Simek <michal.si...@xilinx.com>
> ---
>
> configs/xilinx_versal_virt_defconfig | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/configs/xilinx_versal_virt_defconfig
> b/configs/xilinx_versal_virt_defconfig
> index 707693713a7e..f4e9a80728d7 100644
> --- a/configs/xilinx_versal_virt_defconfig
> +++ b/configs/xilinx_versal_virt_defconfig
> @@ -1,5 +1,6 @@
> CONFIG_ARM=y
> CONFIG_POSITION_INDEPENDENT=y
> +CONFIG_SYS_INIT_SP_BSS_OFFSET=1572864
> CONFIG_ARCH_VERSAL=y
> CONFIG_SYS_TEXT_BASE=0x8000000
> CONFIG_SYS_MALLOC_F_LEN=0x100000
> --
> 2.31.1
>
Applied.
M
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
