Add support for 1.3GHz, 1.35GHz and 1.4GHz parts. This is based on equivalent code in Broadcom's LDK 5.0.6.
Signed-off-by: Chris Packham <[email protected]> --- As Broadcom are currently migrating users to the BCM58525BB1KF14G part I suspect others may want this. In our case because we wanted to still run at 1.2GHz we also had to set CONFIG_ARMCLK to 1200. arch/arm/cpu/armv7/iproc-common/armpll.c | 29 +++++++++++++----------- 1 file changed, 16 insertions(+), 13 deletions(-) diff --git a/arch/arm/cpu/armv7/iproc-common/armpll.c b/arch/arm/cpu/armv7/iproc-common/armpll.c index efa3d9e5a9bd..8c3a323f0654 100644 --- a/arch/arm/cpu/armv7/iproc-common/armpll.c +++ b/arch/arm/cpu/armv7/iproc-common/armpll.c @@ -19,19 +19,22 @@ struct armpll_parameters { }; struct armpll_parameters armpll_clk_tab[] = { - { 25, 64, 1, 1, 0}, - { 100, 64, 1, 1, 2}, - { 400, 64, 1, 1, 6}, - { 448, 71, 713050, 1, 6}, - { 500, 80, 1, 1, 6}, - { 560, 89, 629145, 1, 6}, - { 600, 96, 1, 1, 6}, - { 800, 64, 1, 1, 7}, - { 896, 71, 713050, 1, 7}, - { 1000, 80, 1, 1, 7}, - { 1100, 88, 1, 1, 7}, - { 1120, 89, 629145, 1, 7}, - { 1200, 96, 1, 1, 7}, + { 25, 64, 1, 1, 0}, + { 100, 64, 1, 1, 2}, + { 400, 64, 1, 1, 6}, + { 448, 71, 713050, 1, 6}, + { 500, 80, 1, 1, 6}, + { 560, 89, 629145, 1, 6}, + { 600, 96, 1, 1, 6}, + { 800, 64, 1, 1, 7}, + { 896, 71, 713050, 1, 7}, + { 1000, 80, 1, 1, 7}, + { 1100, 88, 1, 1, 7}, + { 1120, 89, 629145, 1, 7}, + { 1200, 96, 1, 1, 7}, + { 1300, 104, 1, 1, 7}, + { 1350, 108, 1, 1, 7}, + { 1400, 112, 1, 1, 7}, }; uint32_t armpll_config(uint32_t clkmhz) -- 2.31.1
