> CPU: Freescale i.MX6ULL rev1.1 792 MHz (running at 396 MHz) > CPU: Industrial temperature grade (-40C to 105C) at 49C > Reset cause: POR > Model: Seeed NPi iMX6ULL Dev Board with NAND > Board: Seeed NPi i.MX6ULL Dev Board > DRAM: 512 MiB > NAND: 512 MiB > MMC: FSL_SDHC: 0 > In: serial@2020000 > Out: serial@2020000 > Err: serial@2020000 > Net: FEC0 > Working: > - Eth0 > - MMC/SD > - NAND > - UART 1 > - USB host > Signed-off-by: Navin Sankar Velliangiri <[email protected]> > Note: > Changes in v2: > * removed unnecessary space in imx6ull-seeed-npi-imx6ull-dev-board.dts file. > * Used SZ_2M for CONFIG_SYS_MALLOC_LEN size allocation. Applied to u-boot-imx, master, thanks !
Best regards, Stefano Babic -- ===================================================================== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected] =====================================================================
