On Fri, Jun 04, 2021 at 11:58:23AM +0800, Sean Anderson wrote: > Changes in v2: > - Convert stage to enum > - Only force probe clocks pre-reloc > - Rebase on u-boot/master > > Sean Anderson (11): > clk: Allow force setting clock defaults before relocation > clk: k210: Rewrite to remove CCF > clk: k210: Move pll into the rest of the driver > clk: k210: Implement soc_clk_dump > clk: k210: Re-add support for setting rate > clk: k210: Don't set PLL rates if we are already at the correct rate > clk: k210: Remove bypass driver > clk: k210: Move k210 clock out of its own subdirectory > k210: dts: Set PLL1 to the same rate as PLL0 > k210: Don't imply CCF > test: Add K210 PLL tests to sandbox defconfigs > > MAINTAINERS | 4 +- > arch/riscv/dts/k210.dtsi | 2 + > board/sipeed/maix/Kconfig | 2 - > configs/sandbox64_defconfig | 2 + > configs/sandbox_defconfig | 2 + > configs/sandbox_flattree_defconfig | 2 + > configs/sipeed_maix_bitm_defconfig | 1 - > drivers/clk/Kconfig | 14 +- > drivers/clk/Makefile | 2 +- > drivers/clk/clk-uclass.c | 27 +- > drivers/clk/clk_kendryte.c | 1320 +++++++++++++++++++++++ > drivers/clk/kendryte/Kconfig | 12 - > drivers/clk/kendryte/Makefile | 1 - > drivers/clk/kendryte/bypass.c | 273 ----- > drivers/clk/kendryte/clk.c | 668 ------------ > drivers/clk/kendryte/pll.c | 585 ---------- > drivers/clk/rockchip/clk_rk3308.c | 2 +- > drivers/core/device.c | 2 +- > drivers/net/gmac_rockchip.c | 2 +- > include/clk.h | 30 +- > include/dt-bindings/clock/k210-sysctl.h | 94 +- > include/kendryte/bypass.h | 31 - > include/kendryte/clk.h | 35 - > include/kendryte/pll.h | 34 - > 24 files changed, 1436 insertions(+), 1711 deletions(-) > create mode 100644 drivers/clk/clk_kendryte.c > delete mode 100644 drivers/clk/kendryte/Kconfig > delete mode 100644 drivers/clk/kendryte/Makefile > delete mode 100644 drivers/clk/kendryte/bypass.c > delete mode 100644 drivers/clk/kendryte/clk.c > delete mode 100644 drivers/clk/kendryte/pll.c > delete mode 100644 include/kendryte/bypass.h > delete mode 100644 include/kendryte/clk.h > > -- > 2.31.0 >
Hi Sean, This serie of patches seems to fail CI, could you fix these errors and send it again? Thanks! CI result: https://dev.azure.com/ycliang-tw/u-boot-riscv/_build/results?buildId=37&view=results Best regards, Leo
