Hi Johan, On Mon, 21 Jun 2021 at 12:39, Johan Jonker <[email protected]> wrote: > > Hi Simon, Heiko, > > With introduction of rockchip-nand-controller.c in Linux and recently > rockchip_nfc.c in U-boot it offers a renewed opportunity to add support > for MK808 with a rk3066 + NAND to boot from. > rk3066 shares /arch/arm/dts/rk3xxx.dtsi with rk3188. > The only 'usable' boot loader now is closed source with proprietary FTL. > > As a spinoff to that discussion I've tried to compile for > rk3188-radxarock as an example due to the lack of rk3066 support in next > and enabling the new rockchip_nfc.c driver. > I'm not familiar with Python/U-boot. > Do you have an idea what this error below is about? > > Kind regards, > > Johan > === > > python --version > Python 2.7.13 > > === > > From rock_defconfig: > CONFIG_SPL_OF_PLATDATA=y > > === > > git clone -b next > https://source.denx.de/u-boot/custodians/u-boot-rockchip.git > u-boot-next-20210619 > > make rock_defconfig > > make CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- menuconfig > > [ ] Support for NAND controller on Rockchip SoCs (NEW) > > Add to rock.h: > #define CONFIG_SYS_MAX_NAND_DEVICE 1 > > make CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- all > > === > mkdir -p spl/dts/ > FDTGREP spl/dts/dt-spl.dtb > COPY spl/u-boot-spl.dtb > CC spl/./lib/asm-offsets.s > CC spl/./arch/arm/lib/asm-offsets.s > DTOC spl/dts/dt-plat.c > Traceback (most recent call last): > File "./tools/dtoc/dtoc", line 112, in <module> > options.phase, instantiate=options.instantiate) > File > "~/Downloads/u-boot-next-20210619/tools/dtoc/../dtoc/dtb_platdata.py", > line 1180, in run_steps > scan.scan_drivers() > File > "~/Downloads/u-boot-next-20210619/tools/dtoc/../dtoc/src_scan.py", line > 649, in scan_drivers > self.scan_driver(pathname) > File > "~/Downloads/u-boot-next-20210619/tools/dtoc/../dtoc/src_scan.py", line > 608, in scan_driver > self._parse_driver(fname, buff) > File > "~/Downloads/u-boot-next-20210619/tools/dtoc/../dtoc/src_scan.py", line > 558, in _parse_driver > self._driver_aliases[m_alias[2]] = m_alias[1] > TypeError: '_sre.SRE_Match' object is not subscriptable > scripts/Makefile.spl:352: recipe for target 'spl/dts/dt-plat.c' failed > make[1]: *** [spl/dts/dt-plat.c] Error 1 > Makefile:1977: recipe for target 'spl/u-boot-spl' failed > make: *** [spl/u-boot-spl] Error 2 > > === > > Changed: > self._driver_aliases[m_alias[2]] = m_alias[1] > > To: > self._driver_aliases[m_alias.group(2)] = m_alias.group(1) > > Is that a correct python change of mine?
I think so, yes. I will take a look. > > === > > After that it compiles normal with only this warning. > > DTOC spl/dts/dt-plat.c > WARNING: the driver rockchip_rk3188_grf was not found in the driver list > WARNING: the driver rockchip_rk3188_pmu was not found in the driver list > WARNING: the driver rockchip_rk3188_uart was not found in the driver list > DTOC include/generated/dt-structs-gen.h > WARNING: the driver rockchip_rk3188_grf was not found in the driver list > WARNING: the driver rockchip_rk3188_pmu was not found in the driver list > WARNING: the driver rockchip_rk3188_uart was not found in the driver list > DTOC include/generated/dt-decl.h > WARNING: the driver rockchip_rk3188_grf was not found in the driver list > WARNING: the driver rockchip_rk3188_pmu was not found in the driver list > WARNING: the driver rockchip_rk3188_uart was not found in the driver list OK that means you have the driver missing. It is not fatal unless OF_PLATDATA_INST is enabled. [..] Regards, Simon
