Dear Srinivas Ganji, In message <[email protected]> you wrote: > > > You should never need to modify arch/powerpc/lib/board.c and > > arch/powerpc/cpu/ppc4xx/start.S. I recommend you undo thse changes. > > We have modified the start.S file for the following #define as our > flash start address is 0xFF000000 according to flash size.
Please look at the code. You do not have to change this file. Just provide a correct definition in your board config file. Please do not meddle with global files. > We have added only debug statements in board.c. We did not change any > value/variable in this file. "Only adding debug statements" may break a board as well, if you don't know exactly what you are doing. > We are using yosemite board configuration files as we derived our > board as per the yosemite board. Please let me know, if there is any > document / README for creating the own config files. There is a little help in the README. > > > make YOSEMITE_config > > > > I am pretty sure this is NOT the command you used. Note thate case > > matters. > > The README file which is available in the main u-boot directory says > use CAPITAL letters YOSEMITE only. That is the reason, I used it. I > also saw in the google where they used the CAPITAL letters for I really have no idea what you are talking about: there is not a single reference to Yosemite (in whatever spelling) in the README. And the make target is "yosemite_config", and has always been like that. If this is different for you, your source tree must be seriously modified (read: messed up). Best regards, Wolfgang Denk -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: [email protected] The software required `Windows 95 or better', so I installed Linux. _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
