Set MC Firmware size in read commands in env to 2MB. Update DDR Memory read address for MC firmware to 0x80a00000 and MC DPC address to 0x80e00000.
Signed-off-by: Priyanka Jain <[email protected]> --- changes for v2: updated MC fw, dpc address include/configs/ls2080ardb.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index f2dc495fbb..49c2cc573b 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -314,11 +314,11 @@ unsigned long get_board_sys_clk(void); "env exists secureboot && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000; " \ - "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80a00000 0xa00000 0x200000; " \ "sf read 0x80e00000 0xe00000 0x100000; " \ "fsl_mc start mc 0x80a00000 0x80e00000 \0" #define SD_MC_INIT_CMD \ - "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \ + "mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ "mmc read 0x80e00000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ @@ -339,19 +339,19 @@ unsigned long get_board_sys_clk(void); "env exists secureboot && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000; " \ - "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80a00000 0xa00000 0x200000; " \ "sf read 0x80e00000 0xe00000 0x100000; " \ "fsl_mc start mc 0x80a00000 0x80e00000 \0" #elif defined(CONFIG_SD_BOOT) #define MC_INIT_CMD \ - "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ - "mmc read 0x80100000 0x7000 0x800;" \ + "mcinitcmd=mmcinfo;mmc read 0x80a00000 0x5000 0x1000;" \ + "mmc read 0x80e00000 0x7000 0x800;" \ "env exists secureboot && " \ "mmc read 0x80640000 0x3200 0x20 && " \ "mmc read 0x80680000 0x3400 0x20 && " \ "esbc_validate 0x80640000 && " \ "esbc_validate 0x80680000 ;" \ - "fsl_mc start mc 0x80000000 0x80100000\0" \ + "fsl_mc start mc 0x80a00000 0x80e00000\0" \ "mcmemsize=0x70000000\0" #else #define MC_INIT_CMD \ -- 2.17.1
