From: Manish Narani <[email protected]> Move the PHY properties from DWC3 node to USB node in ZynqMP DTs as here the USB3 PHY used is PSGTR, which is connected to Xilinx USB core. This PHY initialization should be handled from Xilinx USB core as the prerequisite register configurations are done here only.
Signed-off-by: Manish Narani <[email protected]> Signed-off-by: Michal Simek <[email protected]> --- arch/arm/dts/zynqmp-p-a2197-00-revA.dts | 4 ++-- arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 4 ++-- arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 4 ++-- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 4 ++-- arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 8 ++++---- arch/arm/dts/zynqmp-zcu100-revC.dts | 8 ++++---- arch/arm/dts/zynqmp-zcu102-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu104-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu104-revC.dts | 4 ++-- arch/arm/dts/zynqmp-zcu106-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu111-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu208-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu216-revA.dts | 4 ++-- 13 files changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts index d50b335e674d..c893aaaafd8f 100644 --- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts @@ -545,6 +545,8 @@ status = "okay"; xlnx,usb-polarity = <0>; xlnx,usb-reset-mode = <0>; + phy-names = "usb3-phy"; + phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; }; &dwc3_0 { @@ -553,8 +555,6 @@ snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; maximum-speed = "super-speed"; - phy-names = "usb3-phy"; - phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; }; &usb1 { diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts index 59d5751e0634..4e8086c82f23 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts @@ -125,6 +125,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; usbhub: usb5744 { /* u43 */ compatible = "microchip,usb5744"; reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; @@ -135,8 +137,6 @@ status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts index b5443afff982..048d5665c57b 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts @@ -109,14 +109,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index b92a2ee3e60a..4a87bd6a6aaf 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -424,14 +424,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index 344323ab7f93..13812470ae34 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -221,27 +221,27 @@ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; }; &dwc3_1 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts index 2d615774782f..ea630a43dc7f 100644 --- a/arch/arm/dts/zynqmp-zcu100-revC.dts +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts @@ -561,13 +561,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; }; &dwc3_0 { status = "okay"; dr_mode = "peripheral"; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; maximum-speed = "super-speed"; }; @@ -576,13 +576,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; }; &dwc3_1 { status = "okay"; dr_mode = "host"; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index 1d4a9cdc69f0..175252d2def2 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -1035,14 +1035,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index 7e5eca82fdaa..9cd30447eb3e 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -502,14 +502,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index f4ebcbb318b4..45191569c101 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -514,14 +514,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index ac6689c16730..50cc72eb9240 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -1012,14 +1012,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index 8d57ca2b3bf3..2b15ce1ea847 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -849,14 +849,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts index d3e20ae85d7e..32a6e6fb55e2 100644 --- a/arch/arm/dts/zynqmp-zcu208-revA.dts +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts @@ -692,13 +692,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts index ae7c18196894..1e347036d0a7 100644 --- a/arch/arm/dts/zynqmp-zcu216-revA.dts +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -696,13 +696,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; -- 2.32.0
