Hello Reinhard, Reinhard Meyer wrote: > Dear Darius, >>> Now running in RAM - U-Boot at: 57fbe000 >>> NAND: raise: Signal # 8 caught >>> raise: Signal # 8 caught >>> raise: Signal # 8 caught >> This looks suspect to me. Seems to me some early init >> (pin setup? clocks?) is not OK. If you have early inits, >> you must do that now in board_early_init_f() (and you >> have to define CONFIG_BOARD_EARLY_INIT_F to enable this >> feature) > I got _exactly_ the same NAND messages when ARM relocation > was first used, because the timer.c did use static variables > which are not working before relocation. > Have a look at your timer implementation.
Huh.. thought the elf relocation fixed this problem? bye, Heiko -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
