Binman needs this symbol to be able to figure out the start of the image. Detect if it is missing and report an error if any symbols are needed.
Signed-off-by: Simon Glass <[email protected]> --- tools/binman/binman.rst | 104 +++++++++++++++++++++++++++++++++++++++ tools/binman/elf.py | 6 ++- tools/binman/elf_test.py | 7 ++- 3 files changed, 113 insertions(+), 4 deletions(-) diff --git a/tools/binman/binman.rst b/tools/binman/binman.rst index 09e7b571982..d36b1473604 100644 --- a/tools/binman/binman.rst +++ b/tools/binman/binman.rst @@ -1158,6 +1158,110 @@ development, since dealing with exceptions and problems in threads is more difficult. This avoids any use of ThreadPoolExecutor. +Dealing with warnings and errors +-------------------------------- + +__image_copy_start +~~~~~~~~~~~~~~~~~~ + +If you see:: + + Cannot process symbol 'xxx' since there is no __image_copy_start + +this means that your SPL image does not include an `__image_copy_start` symbol. +You can check this with:: + + nm spl/u-boot-spl |grep __image_copy_start + +If there is no output them you don't have that symbol. It is normally created +in a `u-boot-spl.lds` file, like this:: + + text : + { + __image_copy_start = .; + *(.vectors) + CPUDIR/start.o (.text*) + *(.text*) + *(.glue*) + } + +Check the appropriate file for your board, typically in the `arch/xxx/cpu` +or `arch/xxx/cpu/xxx` directory. + +Entry xx not found in list +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If you see something like:: + + output: 'binman: Section '/binman/u-boot-spl-ddr': + Symbol '_binman_u_boot_any_prop_image_pos' + in entry '/binman/u-boot-spl-ddr/u-boot-spl/u-boot-spl-nodtb': + Entry 'u-boot-any' not found in list (u-boot-spl-nodtb,u-boot-spl-dtb, + u-boot-spl,blob-ext@1,blob-ext@2,blob-ext@3,blob-ext@4,main-section) + +this means that binman knows it should set the value of a symbol called +`_binman_u_boot_any_prop_image_pos` but does not know how. That symbol name is +generated by the `binman_symname` macro (see `binman_sym.h`):: + + #define binman_symname(_entry_name, _prop_name) \ + _binman_ ## _entry_name ## _prop_ ## _prop_name + +so binman decodes it into: + +_binman_ + prefix for all symbols +u_boot_any + entry to find +_prop_ + prefix for property +image_pos + image_pos property + +It therefore looks for u-boot-any, which means any U-Boot symbol. Supported ones +are: + +- u-boot +- u-boot-img +- u-boot-nodtb + +You can see a list of the symbols it tried, in brackets. None of these matches +the above list. The source definition in this example is:: + + &binman { + u-boot-spl-ddr { + filename = "u-boot-spl-ddr.bin"; + pad-byte = <0xff>; + align-size = <4>; + align = <4>; + + u-boot-spl { + align-end = <4>; + }; + + blob-ext@1 { + filename = "lpddr4_pmu_train_1d_imem.bin"; + size = <0x8000>; + }; + + blob-ext@2 { + filename = "lpddr4_pmu_train_1d_dmem.bin"; + size = <0x4000>; + }; + + blob-ext@3 { + filename = "lpddr4_pmu_train_2d_imem.bin"; + size = <0x8000>; + }; + + blob-ext@4 { + filename = "lpddr4_pmu_train_2d_dmem.bin"; + size = <0x4000>; + }; + }; + +and you can see that, while `u-boot-spl` is present, `u-boot` is not. Binman +must find the required symbol somewhere in the same image. + History / Credits ----------------- diff --git a/tools/binman/elf.py b/tools/binman/elf.py index 03b49d7163c..f14d07da157 100644 --- a/tools/binman/elf.py +++ b/tools/binman/elf.py @@ -112,12 +112,14 @@ def LookupAndWriteSymbols(elf_fname, entry, section): if not syms: return base = syms.get('__image_copy_start') - if not base: - return for name, sym in syms.items(): if name.startswith('_binman'): msg = ("Section '%s': Symbol '%s'\n in entry '%s'" % (section.GetPath(), name, entry.GetPath())) + if not base: + raise ValueError("Cannot process symbol '%s' since there is no __image_copy_start" % + name) + offset = sym.address - base.address if offset < 0 or offset + sym.size > entry.contents_size: raise ValueError('%s has offset %x (size %x) but the contents ' diff --git a/tools/binman/elf_test.py b/tools/binman/elf_test.py index 7a128018d9f..96630502b2f 100644 --- a/tools/binman/elf_test.py +++ b/tools/binman/elf_test.py @@ -134,8 +134,11 @@ class TestElf(unittest.TestCase): entry = FakeEntry(10) section = FakeSection() elf_fname = self.ElfTestFile('u_boot_binman_syms_bad') - self.assertEqual(elf.LookupAndWriteSymbols(elf_fname, entry, section), - None) + with self.assertRaises(ValueError) as e: + self.assertEqual(elf.LookupAndWriteSymbols(elf_fname, entry, section), + None) + self.assertIn("Cannot process symbol '_binman_u_boot_spl_any_prop_offset' since there is no __image_copy_start", + str(e.exception)) def testBadSymbolSize(self): """Test that an attempt to use an 8-bit symbol are detected -- 2.32.0.432.gabb21c7263-goog
