Am 28.10.2010 13:16, schrieb Reinhard Meyer: >> CONFIG_SKIP_RELOCATE_UBOOT > > The old way in ARM before ELF relocation was introduced. A misnomer because > it seemingly > skipped the *COPY* of the image from whereever it was loaded to the TEXT_BASE > location. There was no real *RELOCATION* done there. This define probably > does not work > anymore. It was set on ARM boards where a preloader did load u-boot to the > TEXT_BASE address. > > In an up to date ARM system all those defines MUST NOT be set.
Thanks for that explanation. In regard to CONFIG_SKIP_RELOCATE_UBOOT I've hit a typo in arch/arm/cpu/arm926ejs/start.S while trying to use this define to build a non relocatable u-boot. In line 383 there is ldr pc, r0 which seems to should be ldr pc, [r0] But after fixing that I've just run into other problems compiling u-boot with CONFIG_SKIP_RELOCATE_UBOOT defined. I don't send a patch, because I assume that code is just dead will be eliminated in the near future. Regards, Alexander _______________________________________________ U-Boot mailing list [email protected] http://lists.denx.de/mailman/listinfo/u-boot
