On 7/24/21 5:10 PM, Ashok Reddy Soma wrote: > Change deviceid to node_id in arasan_zynqmp_dll_reset() and also in > tapdelay related static inline functions to reflect proper name and > for consistency. > > Signed-off-by: Ashok Reddy Soma <[email protected]>
Reviewed-by: Jaehoon Chung <[email protected]> Best Regards, Jaehoon Chung > --- > > drivers/mmc/zynq_sdhci.c | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/drivers/mmc/zynq_sdhci.c b/drivers/mmc/zynq_sdhci.c > index 97caca51e2..8ffa8c1269 100644 > --- a/drivers/mmc/zynq_sdhci.c > +++ b/drivers/mmc/zynq_sdhci.c > @@ -75,17 +75,17 @@ static const u8 mode2timing[] = { > [MMC_HS_200] = MMC_TIMING_MMC_HS200, > }; > > -static inline int arasan_zynqmp_set_in_tapdelay(u8 deviceid, u32 type, > +static inline int arasan_zynqmp_set_in_tapdelay(u8 node_id, u32 type, > u32 itap_delay) > { > - return xilinx_pm_request(PM_IOCTL, (u32)deviceid, IOCTL_SET_SD_TAPDELAY, > + return xilinx_pm_request(PM_IOCTL, (u32)node_id, IOCTL_SET_SD_TAPDELAY, > type, itap_delay, NULL); > } > > -static inline int arasan_zynqmp_set_out_tapdelay(u8 deviceid, u32 type, > +static inline int arasan_zynqmp_set_out_tapdelay(u8 node_id, u32 type, > u32 otap_delay) > { > - return xilinx_pm_request(PM_IOCTL, (u32)deviceid, IOCTL_SET_SD_TAPDELAY, > + return xilinx_pm_request(PM_IOCTL, (u32)node_id, IOCTL_SET_SD_TAPDELAY, > type, otap_delay, NULL); > } > > @@ -95,7 +95,7 @@ static inline int zynqmp_pm_sd_dll_reset(u8 node_id, u32 > type) > type, 0, NULL); > } > > -static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 deviceid) > +static int arasan_zynqmp_dll_reset(struct sdhci_host *host, u8 node_id) > { > struct mmc *mmc = (struct mmc *)host->mmc; > struct udevice *dev = mmc->dev; > @@ -108,14 +108,14 @@ static int arasan_zynqmp_dll_reset(struct sdhci_host > *host, u8 deviceid) > sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); > > /* Issue DLL Reset */ > - ret = zynqmp_pm_sd_dll_reset(deviceid, PM_DLL_RESET_ASSERT); > + ret = zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_ASSERT); > if (ret) { > dev_err(dev, "dll_reset assert failed with err: %d\n", ret); > return ret; > } > > mdelay(1); > - ret = zynqmp_pm_sd_dll_reset(deviceid, PM_DLL_RESET_RELEASE); > + ret = zynqmp_pm_sd_dll_reset(node_id, PM_DLL_RESET_RELEASE); > if (ret) { > dev_err(dev, "dll_reset release failed with err: %d\n", ret); > return ret; >
