The N2+ dtb is meson-g12b-odroid-n2-plus.dtb, not n2_plus, so
correct the suffix provided in the board file. Also align the
board ident string shown during boot to match.
Fixes: 8bc780106c13 ("board: amlogic: odroid: add runtime detection of the
N2/N2+/C4/HC4 variants")
Signed-off-by: Christian Hewitt <[email protected]>
---
board/amlogic/odroid-n2/odroid-n2.c | 2 +-
configs/odroid-n2_defconfig | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/board/amlogic/odroid-n2/odroid-n2.c
b/board/amlogic/odroid-n2/odroid-n2.c
index 88a60f34fe..acfd107fc5 100644
--- a/board/amlogic/odroid-n2/odroid-n2.c
+++ b/board/amlogic/odroid-n2/odroid-n2.c
@@ -48,7 +48,7 @@ static struct meson_odroid_boards {
/* OdroidN2 rev 2019,2,7 */
{ MESON_SOC_ID_G12B, 330 * 4, 350 * 4, "n2" },
/* OdroidN2plus rev 2019,11,20 */
- { MESON_SOC_ID_G12B, 410 * 4, 430 * 4, "n2_plus" },
+ { MESON_SOC_ID_G12B, 410 * 4, 430 * 4, "n2-plus" },
/* OdroidC4 rev 2020,01,29 */
{ MESON_SOC_ID_SM1, 80 * 4, 100 * 4, "c4" },
/* OdroidHC4 rev 2019,12,10 */
diff --git a/configs/odroid-n2_defconfig b/configs/odroid-n2_defconfig
index bac44b61ab..1f718a3154 100644
--- a/configs/odroid-n2_defconfig
+++ b/configs/odroid-n2_defconfig
@@ -9,7 +9,7 @@ CONFIG_DEFAULT_DEVICE_TREE="meson-g12b-odroid-n2"
CONFIG_MESON_G12A=y
CONFIG_DEBUG_UART_BASE=0xff803000
CONFIG_DEBUG_UART_CLOCK=24000000
-CONFIG_IDENT_STRING=" odroid-n2/n2_plus"
+CONFIG_IDENT_STRING=" odroid-n2/n2-plus"
CONFIG_DEBUG_UART=y
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
--
2.17.1
