Hi Paul, On Tue, Aug 10, 2021 at 10:33 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Paul, > > On Tue, Aug 10, 2021 at 10:06 PM Paul Liu <paul....@linaro.org> wrote: > > > > Hi Fabio, > > > > It might work. But why? I mean the imx8mm-evk has already switched to > > binman on the mainline. > > So we should do the same. If you can't get into U-boot prompt using binman > > I can give you more detailed information. > > The reason I removed binman support was only for debugging purposes, > as I don't plan to use fip.bin.
Even if I keep binman support and only remove fip.bin to prevent the build failure like this: https://pastebin.com/raw/FZ7D0rK0 I still cannot boot: U-Boot SPL 2021.07-00001-g54086b3f1019-dirty (Aug 10 2021 - 18:39:22 -0300) DDRINFO: Cfg attempt: [ 1/6 ] DDRINFO(M): mr5-8 [ 0xff000010 ] DDRINFO(T): mr5-8 [ 0x5000010 ] resetting ... U-Boot SPL 2021.07-00001-g54086b3f1019-dirty (Aug 10 2021 - 18:39:22 -0300) DDRINFO: Cfg attempt: [ 2/6 ] DDRINFO(M): mr5-8 [ 0xff000010 ] DDRINFO(T): mr5-8 [ 0x1061010 ] resetting ... U-Boot SPL 2021.07-00001-g54086b3f1019-dirty (Aug 10 2021 - 18:39:22 -0300) DDRINFO: Cfg attempt: [ 3/6 ] DDRINFO(M): mr5-8 [ 0xff000010 ] DDRINFO(T): mr5-8 [ 0xff000010 ] Normal Boot WDT: Not starting Trying to boot from MMC2 Could you confirm whether U-Boot 2021.07 boots for you? Any ideas, please? Thanks