On 7/16/21 8:43 AM, Claudiu Beznea wrote: > Hi, > > After added CCF support for SAM9X60 the CPU, crystal and master clocks > were not displayed correctly. These clocks are now displayed by at91_cpu > driver. > Adapt master clock driver by adding control logic for its prescaler and > divider such that these to be correctly retrived by at91_cpu driver > via device tree (or any other mechanism). > > Thank you, > Claudiu Beznea > > Claudiu Beznea (4): > clk: at91: clk-master: split master clock in pres and divider > cpu: at91: add compatible for ARM9260EJ-S > ARM: dts: at91: sam9x60: add bindings for CPU > configs: sam9x60ek: enable CONFIG_CPU > > arch/arm/dts/sam9x60.dtsi | 12 +++ > configs/sam9x60ek_mmc_defconfig | 1 + > configs/sam9x60ek_nandflash_defconfig | 1 + > configs/sam9x60ek_qspiflash_defconfig | 1 + > drivers/clk/at91/clk-master.c | 107 +++++++++++++++++++++----- > drivers/clk/at91/pmc.h | 7 +- > drivers/clk/at91/sam9x60.c | 44 +++++++---- > drivers/clk/at91/sama7g5.c | 36 +++++---- > drivers/cpu/at91_cpu.c | 1 + > 9 files changed, 160 insertions(+), 50 deletions(-) >
Applied series to u-boot-atmel/next, thanks !