There are no users of more than 1 i2c bus in the non-DM case currently. Remove the additional defines for this.
Signed-off-by: Tom Rini <[email protected]> --- drivers/i2c/designware_i2c.c | 18 ------------------ 1 file changed, 18 deletions(-) diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index e57eed0f6cdd..d95f77649e4a 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -674,24 +674,6 @@ U_BOOT_I2C_ADAP_COMPLETE(dw_0, dw_i2c_init, dw_i2c_probe, dw_i2c_read, dw_i2c_write, dw_i2c_set_bus_speed, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE, 0) -#if CONFIG_SYS_I2C_BUS_MAX >= 2 -U_BOOT_I2C_ADAP_COMPLETE(dw_1, dw_i2c_init, dw_i2c_probe, dw_i2c_read, - dw_i2c_write, dw_i2c_set_bus_speed, - CONFIG_SYS_I2C_SPEED1, CONFIG_SYS_I2C_SLAVE1, 1) -#endif - -#if CONFIG_SYS_I2C_BUS_MAX >= 3 -U_BOOT_I2C_ADAP_COMPLETE(dw_2, dw_i2c_init, dw_i2c_probe, dw_i2c_read, - dw_i2c_write, dw_i2c_set_bus_speed, - CONFIG_SYS_I2C_SPEED2, CONFIG_SYS_I2C_SLAVE2, 2) -#endif - -#if CONFIG_SYS_I2C_BUS_MAX >= 4 -U_BOOT_I2C_ADAP_COMPLETE(dw_3, dw_i2c_init, dw_i2c_probe, dw_i2c_read, - dw_i2c_write, dw_i2c_set_bus_speed, - CONFIG_SYS_I2C_SPEED3, CONFIG_SYS_I2C_SLAVE3, 3) -#endif - #else /* CONFIG_DM_I2C */ /* The DM I2C functions */ -- 2.17.1
