From: Oleksandr Suvorov <[email protected]> Variable "kernel_image" is used in boot.scr script only, that sets its own default value to the constant string @@KERNEL_IMAGETYPE@@ in case "kernel_image" is not set. The default name of the kernel image shipped with BSP 5.x is "Image.gz". Setting kernel_image="Image" as a pre-defined u-boot variable breaks booting systems with modern versions of boot.scr, whereas renaming it fixes booting with modern scripts and does not break working of earlier versions of boot.scr.
Signed-off-by: Oleksandr Suvorov <[email protected]> Signed-off-by: Marcel Ziswiler <[email protected]> --- Changes in v2: - New patch allows booting recent embedded Linux BSPs. include/configs/verdin-imx8mm.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h index 7be5e5ddf11..ad13f804be9 100644 --- a/include/configs/verdin-imx8mm.h +++ b/include/configs/verdin-imx8mm.h @@ -60,13 +60,13 @@ "console=ttymxc0\0" \ "fdt_addr=0x43000000\0" \ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "image=Image\0" \ "initrd_addr=0x43800000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_image=Image\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp" \ "\0" \ - "nfsboot=run netargs; dhcp ${loadaddr} ${kernel_image}; " \ + "nfsboot=run netargs; dhcp ${loadaddr} ${image}; " \ "tftp ${fdt_addr} verdin/${fdtfile}; " \ "booti ${loadaddr} - ${fdt_addr}\0" \ "setup=setenv setupargs console=${console},${baudrate} " \ -- 2.26.2
