Use the common imx8mm-venice-u-boot.dtsi (dtb for the
'DEFAULT_DEVICE_TREE) so that it inherits things like binman.
Signed-off-by: Tim Harvey <thar...@gateworks.com>
---
arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi | 62 +++----------------
1 file changed, 9 insertions(+), 53 deletions(-)
diff --git a/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi
b/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi
index 1a15d6a2ad..7670243851 100644
--- a/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-venice-gw700x-u-boot.dtsi
@@ -3,59 +3,7 @@
* Copyright 2021 Gateworks Corporation
*/
-#include "imx8mm-u-boot.dtsi"
-
-&gpio1 {
- u-boot,dm-spl;
-};
-
-&gpio2 {
- u-boot,dm-spl;
-};
-
-&gpio3 {
- u-boot,dm-spl;
-};
-
-&gpio4 {
- u-boot,dm-spl;
-};
-
-&gpio5 {
- u-boot,dm-spl;
-};
-
-&uart2 {
- u-boot,dm-spl;
-};
-
-&pinctrl_uart2 {
- u-boot,dm-spl;
-};
-
-&usdhc3 {
- u-boot,dm-spl;
-};
-
-&pinctrl_usdhc3 {
- u-boot,dm-spl;
-};
-
-&i2c1 {
- u-boot,dm-spl;
-};
-
-&pinctrl_i2c1 {
- u-boot,dm-spl;
-};
-
-&i2c2 {
- u-boot,dm-spl;
-};
-
-&pinctrl_i2c2 {
- u-boot,dm-spl;
-};
+#include "imx8mm-venice-u-boot.dtsi"
&fec1 {
phy-reset-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
@@ -63,6 +11,10 @@
phy-reset-post-delay = <1>;
};
+&pinctrl_fec1 {
+ u-boot,dm-spl;
+};
+
&{/soc@0/bus@30800000/i2c@30a20000/pmic@69} {
u-boot,dm-spl;
};
@@ -70,3 +22,7 @@
&{/soc@0/bus@30800000/i2c@30a20000/pmic@69/regulators} {
u-boot,dm-spl;
};
+
+&pinctrl_pmic {
+ u-boot,dm-spl;
+};
--
2.17.1
