Move all the CCSR related device nodes into /soc similiar to the linux
device tree.
Signed-off-by: Michael Walle <mich...@walle.cc>
---
.../dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi | 4 +
.../dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi | 2 +-
.../dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi | 2 +-
.../dts/fsl-ls1028a-qds-7777-sch-30841.dtsi | 8 +-
.../dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi | 4 +-
.../dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi | 2 +-
.../fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi | 8 +-
.../dts/fsl-ls1028a-qds-9999-sch-24801.dtsi | 8 +-
.../fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi | 8 +-
.../fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi | 8 +-
.../dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi | 2 +-
.../dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi | 2 +-
arch/arm/dts/fsl-ls1028a-qds.dtsi | 4 +
arch/arm/dts/fsl-ls1028a-rdb.dts | 4 +
arch/arm/dts/fsl-ls1028a.dtsi | 767 +++++++++---------
15 files changed, 426 insertions(+), 407 deletions(-)
diff --git a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
index b3861ed98c..fa4c05212a 100644
--- a/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-kontron-sl28-u-boot.dtsi
@@ -266,6 +266,10 @@
u-boot,dm-pre-reloc;
};
+&soc {
+ u-boot,dm-pre-reloc;
+};
+
&sysclk {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
index 23816da8ee..181fd2ddcb 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-1xxx-sch-30842.dtsi
@@ -16,5 +16,5 @@
&enetc0 {
status = "okay";
phy-mode = "usxgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
index c6558ae2e0..67b68f1b3d 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-6xxx-sch-30842.dtsi
@@ -15,5 +15,5 @@
&enetc0 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
index 5a0f060c16..433731df0e 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7777-sch-30841.dtsi
@@ -31,25 +31,25 @@
&mscc_felix_port0 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@00}>;
};
&mscc_felix_port1 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@01}>;
};
&mscc_felix_port2 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
index 39a83e10c4..cb74c8b371 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-7xx7-sch-30841R.dtsi
@@ -20,13 +20,13 @@
&mscc_felix_port0 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@02}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@03}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
index 7d4702e4ff..979c0ddd48 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-8xxx-sch-24801.dtsi
@@ -15,5 +15,5 @@
&enetc0 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
};
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
index 021fe3fbc6..f74c1433af 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801-LBRW.dtsi
@@ -45,25 +45,25 @@
&mscc_felix_port0 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
};
&mscc_felix_port1 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@1c}>;
};
&mscc_felix_port2 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
index b6704d8089..4edc428b27 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-9999-sch-24801.dtsi
@@ -30,25 +30,25 @@
&mscc_felix_port0 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1c}>;
};
&mscc_felix_port1 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1d}>;
};
&mscc_felix_port2 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1e}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "sgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@40/phy@1f}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
index 8c10897e56..7fefb4c99f 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x3xx-sch-30841-LBRW.dtsi
@@ -30,25 +30,25 @@
&mscc_felix_port0 {
status = "okay";
phy-mode = "usxgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@00}>;
};
&mscc_felix_port1 {
status = "okay";
phy-mode = "usxgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@01}>;
};
&mscc_felix_port2 {
status = "okay";
phy-mode = "usxgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "usxgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@03}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
index 1d800dacef..223145756a 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x5xx-sch-28021-LBRW.dtsi
@@ -24,25 +24,25 @@
&mscc_felix_port0 {
status = "okay";
phy-mode = "qsgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@08}>;
};
&mscc_felix_port1 {
status = "okay";
phy-mode = "qsgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@09}>;
};
&mscc_felix_port2 {
status = "okay";
phy-mode = "qsgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0a}>;
};
&mscc_felix_port3 {
status = "okay";
phy-mode = "qsgmii";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@0b}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
index 1fb2cdf0c2..1834418ae2 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-x7xx-sch-30842.dtsi
@@ -20,7 +20,7 @@
&mscc_felix_port1 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@50/phy@02}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
index 2333f74e5a..2ee11bcacb 100644
--- a/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds-xx7x-sch-30842.dtsi
@@ -20,7 +20,7 @@
&mscc_felix_port2 {
status = "okay";
phy-mode = "sgmii-2500";
- phy-handle = <&{/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>;
+ phy-handle = <&{/soc/i2c@2000000/fpga@66/mux-mdio@54/mdio@60/phy@02}>;
};
&mscc_felix_port4 {
diff --git a/arch/arm/dts/fsl-ls1028a-qds.dtsi
b/arch/arm/dts/fsl-ls1028a-qds.dtsi
index 69632fa796..3b223a5b52 100644
--- a/arch/arm/dts/fsl-ls1028a-qds.dtsi
+++ b/arch/arm/dts/fsl-ls1028a-qds.dtsi
@@ -241,6 +241,10 @@
status = "okay";
};
+&soc {
+ u-boot,dm-pre-reloc;
+};
+
&usb1 {
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts
index 82a8c0a0cd..06ee4e747a 100644
--- a/arch/arm/dts/fsl-ls1028a-rdb.dts
+++ b/arch/arm/dts/fsl-ls1028a-rdb.dts
@@ -123,6 +123,10 @@
status = "okay";
};
+&soc {
+ u-boot,dm-pre-reloc;
+};
+
&usb1 {
status = "okay";
};
diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 53b052ed32..b3b497218f 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -21,13 +21,6 @@
clock-output-names = "sysclk";
};
- clockgen: clocking@1300000 {
- compatible = "fsl,ls1028a-clockgen";
- reg = <0x0 0x1300000 0x0 0xa0000>;
- #clock-cells = <2>;
- clocks = <&sysclk>;
- };
-
memory@01080000 {
device_type = "memory";
reg = <0x00000000 0x01080000 0 0x80000000>;
@@ -56,432 +49,446 @@
IRQ_TYPE_LEVEL_LOW)>;
};
- fspi: flexspi@20c0000 {
- compatible = "nxp,lx2160a-fspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x20c0000 0x0 0x10000>,
- <0x0 0x20000000 0x0 0x10000000>;
- reg-names = "fspi_base", "fspi_mmap";
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- clock-names = "fspi_en", "fspi";
- interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- serial0: serial@21c0500 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- serial1: serial@21c0600 {
- device_type = "serial";
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0600 0x0 0x100>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- pcie1: pcie@3400000 {
- compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
- reg = <0x00 0x03400000 0x0 0x80000
- 0x00 0x03480000 0x0 0x40000 /* lut registers */
- 0x00 0x034c0000 0x0 0x40000 /* pf controls registers */
- 0x80 0x00000000 0x0 0x20000>; /* configuration space */
- reg-names = "dbi", "lut", "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0
0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x80 0x40000000 0x0
0x40000000>; /* non-prefetchable memory */
- };
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
- pcie2: pcie@3500000 {
- compatible = "fsl,ls-pcie", "fsl,ls1028-pcie", "snps,dw-pcie";
- reg = <0x00 0x03500000 0x0 0x80000
- 0x00 0x03580000 0x0 0x40000 /* lut registers */
- 0x00 0x035c0000 0x0 0x40000 /* pf controls registers */
- 0x88 0x00000000 0x0 0x20000>; /* configuration space */
- reg-names = "dbi", "lut", "ctrl", "config";
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- num-lanes = <4>;
- bus-range = <0x0 0xff>;
- ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0
0x00010000 /* downstream I/O */
- 0x82000000 0x0 0x40000000 0x88 0x40000000 0x0
0x40000000>; /* non-prefetchable memory */
- };
+ clockgen: clocking@1300000 {
+ compatible = "fsl,ls1028a-clockgen";
+ reg = <0x0 0x1300000 0x0 0xa0000>;
+ #clock-cells = <2>;
+ clocks = <&sysclk>;
+ };
- pcie@1f0000000 {
- compatible = "pci-host-ecam-generic";
- /* ECAM bus 0, HW has more space reserved but not populated */
- bus-range = <0x0 0x0>;
- reg = <0x01 0xf0000000 0x0 0x100000>;
- #address-cells = <3>;
- #size-cells = <2>;
- device_type = "pci";
- ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000>;
- enetc0: pci@0,0 {
- reg = <0x000000 0 0 0 0>;
+ fspi: flexspi@20c0000 {
+ compatible = "nxp,lx2160a-fspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x20c0000 0x0 0x10000>,
+ <0x0 0x20000000 0x0 0x10000000>;
+ reg-names = "fspi_base", "fspi_mmap";
+ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clock-names = "fspi_en", "fspi";
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- enetc1: pci@0,1 {
- reg = <0x000100 0 0 0 0>;
+
+ serial0: serial@21c0500 {
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- enetc2: pci@0,2 {
- reg = <0x000200 0 0 0 0>;
- status = "disabled";
- phy-mode = "internal";
- fixed-link {
- speed = <2500>;
- full-duplex;
- };
- };
- mdio0: pci@0,3 {
- #address-cells=<0>;
- #size-cells=<1>;
- reg = <0x000300 0 0 0 0>;
+ serial1: serial@21c0600 {
+ device_type = "serial";
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
};
- mscc_felix: pci@0,5 {
- reg = <0x000500 0 0 0 0>;
- status = "disabled";
+ pcie1: pcie@3400000 {
+ compatible = "fsl,ls-pcie", "fsl,ls1028-pcie",
"snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x80000
+ 0x00 0x03480000 0x0 0x40000 /* lut
registers */
+ 0x00 0x034c0000 0x0 0x40000 /* pf controls
registers */
+ 0x80 0x00000000 0x0 0x20000>; /*
configuration space */
+ reg-names = "dbi", "lut", "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000
0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x80 0x40000000
0x0 0x40000000>; /* non-prefetchable memory */
+ };
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
+ pcie2: pcie@3500000 {
+ compatible = "fsl,ls-pcie", "fsl,ls1028-pcie",
"snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x80000
+ 0x00 0x03580000 0x0 0x40000 /* lut
registers */
+ 0x00 0x035c0000 0x0 0x40000 /* pf controls
registers */
+ 0x88 0x00000000 0x0 0x20000>; /*
configuration space */
+ reg-names = "dbi", "lut", "ctrl", "config";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ num-lanes = <4>;
+ bus-range = <0x0 0xff>;
+ ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000
0x0 0x00010000 /* downstream I/O */
+ 0x82000000 0x0 0x40000000 0x88 0x40000000
0x0 0x40000000>; /* non-prefetchable memory */
+ };
- mscc_felix_port0: port@0 {
- reg = <0>;
- status = "disabled";
+ pcie@1f0000000 {
+ compatible = "pci-host-ecam-generic";
+ /* ECAM bus 0, HW has more space reserved but not
populated */
+ bus-range = <0x0 0x0>;
+ reg = <0x01 0xf0000000 0x0 0x100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges= <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0
0x160000>;
+ enetc0: pci@0,0 {
+ reg = <0x000000 0 0 0 0>;
+ status = "disabled";
+ };
+ enetc1: pci@0,1 {
+ reg = <0x000100 0 0 0 0>;
+ status = "disabled";
+ };
+ enetc2: pci@0,2 {
+ reg = <0x000200 0 0 0 0>;
+ status = "disabled";
+ phy-mode = "internal";
+
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
};
-
- mscc_felix_port1: port@1 {
- reg = <1>;
- status = "disabled";
+ };
+ mdio0: pci@0,3 {
+ #address-cells=<0>;
+ #size-cells=<1>;
+ reg = <0x000300 0 0 0 0>;
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
};
+ };
- mscc_felix_port2: port@2 {
- reg = <2>;
- status = "disabled";
- };
+ mscc_felix: pci@0,5 {
+ reg = <0x000500 0 0 0 0>;
+ status = "disabled";
- mscc_felix_port3: port@3 {
- reg = <3>;
- status = "disabled";
- };
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
- mscc_felix_port4: port@4 {
- reg = <4>;
- phy-mode = "internal";
- status = "disabled";
+ mscc_felix_port0: port@0 {
+ reg = <0>;
+ status = "disabled";
+ };
- fixed-link {
- speed = <2500>;
- full-duplex;
+ mscc_felix_port1: port@1 {
+ reg = <1>;
+ status = "disabled";
+ };
+
+ mscc_felix_port2: port@2 {
+ reg = <2>;
+ status = "disabled";
};
- };
- mscc_felix_port5: port@5 {
- reg = <5>;
- phy-mode = "internal";
- status = "disabled";
+ mscc_felix_port3: port@3 {
+ reg = <3>;
+ status = "disabled";
+ };
+
+ mscc_felix_port4: port@4 {
+ reg = <4>;
+ phy-mode = "internal";
+ status = "disabled";
- fixed-link {
- speed = <1000>;
- full-duplex;
+ fixed-link {
+ speed = <2500>;
+ full-duplex;
+ };
};
+ mscc_felix_port5: port@5 {
+ reg = <5>;
+ phy-mode = "internal";
+ status = "disabled";
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+
+ };
};
};
+
+ enetc6: pci@0,6 {
+ reg = <0x000600 0 0 0 0>;
+ status = "disabled";
+ phy-mode = "internal";
+ };
};
- enetc6: pci@0,6 {
- reg = <0x000600 0 0 0 0>;
+ i2c0: i2c@2000000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2000000 0x0 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
status = "disabled";
- phy-mode = "internal";
};
- };
- i2c0: i2c@2000000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2000000 0x0 0x10000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
-
- i2c1: i2c@2010000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2010000 0x0 0x10000>;
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
+ i2c1: i2c@2010000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2010000 0x0 0x10000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
- i2c2: i2c@2020000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2020000 0x0 0x10000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
+ i2c2: i2c@2020000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2020000 0x0 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
- i2c3: i2c@2030000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2030000 0x0 0x10000>;
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
+ i2c3: i2c@2030000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2030000 0x0 0x10000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
- i2c4: i2c@2040000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2040000 0x0 0x10000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
+ i2c4: i2c@2040000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2040000 0x0 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
- i2c5: i2c@2050000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2050000 0x0 0x10000>;
- interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
+ i2c5: i2c@2050000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2050000 0x0 0x10000>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
- i2c6: i2c@2060000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2060000 0x0 0x10000>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
+ i2c6: i2c@2060000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2060000 0x0 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
- i2c7: i2c@2070000 {
- compatible = "fsl,vf610-i2c";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2070000 0x0 0x10000>;
- interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "i2c";
- clocks = <&clockgen 4 0>;
- status = "disabled";
- };
+ i2c7: i2c@2070000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2070000 0x0 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&clockgen 4 0>;
+ status = "disabled";
+ };
- lpuart0: serial@2260000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2260000 0x0 0x1000>;
- interrupts = <0 232 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
+ lpuart0: serial@2260000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2260000 0x0 0x1000>;
+ interrupts = <0 232 0x4>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ little-endian;
+ status = "disabled";
+ };
- lpuart1: serial@2270000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2270000 0x0 0x1000>;
- interrupts = <0 233 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
+ lpuart1: serial@2270000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2270000 0x0 0x1000>;
+ interrupts = <0 233 0x4>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ little-endian;
+ status = "disabled";
+ };
- lpuart2: serial@2280000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2280000 0x0 0x1000>;
- interrupts = <0 234 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
+ lpuart2: serial@2280000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2280000 0x0 0x1000>;
+ interrupts = <0 234 0x4>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ little-endian;
+ status = "disabled";
+ };
- lpuart3: serial@2290000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x2290000 0x0 0x1000>;
- interrupts = <0 235 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
+ lpuart3: serial@2290000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2290000 0x0 0x1000>;
+ interrupts = <0 235 0x4>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ little-endian;
+ status = "disabled";
+ };
- lpuart4: serial@22a0000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x22a0000 0x0 0x1000>;
- interrupts = <0 236 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
+ lpuart4: serial@22a0000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x22a0000 0x0 0x1000>;
+ interrupts = <0 236 0x4>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ little-endian;
+ status = "disabled";
+ };
- lpuart5: serial@22b0000 {
- compatible = "fsl,ls1021a-lpuart";
- reg = <0x0 0x22b0000 0x0 0x1000>;
- interrupts = <0 237 0x4>;
- clocks = <&sysclk>;
- clock-names = "ipg";
- little-endian;
- status = "disabled";
- };
+ lpuart5: serial@22b0000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x22b0000 0x0 0x1000>;
+ interrupts = <0 237 0x4>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ little-endian;
+ status = "disabled";
+ };
- usb1: usb3@3100000 {
- compatible = "fsl,layerscape-dwc3";
- reg = <0x0 0x3100000 0x0 0x10000>;
- interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- status = "disabled";
- };
+ usb1: usb3@3100000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ status = "disabled";
+ };
- usb2: usb3@3110000 {
- compatible = "fsl,layerscape-dwc3";
- reg = <0x0 0x3110000 0x0 0x10000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- status = "disabled";
- };
+ usb2: usb3@3110000 {
+ compatible = "fsl,layerscape-dwc3";
+ reg = <0x0 0x3110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ status = "disabled";
+ };
- dspi0: dspi@2100000 {
- compatible = "fsl,vf610-dspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2100000 0x0 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "dspi";
- clocks = <&clockgen 4 0>;
- num-cs = <5>;
- litte-endian;
- status = "disabled";
- };
+ dspi0: dspi@2100000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&clockgen 4 0>;
+ num-cs = <5>;
+ litte-endian;
+ status = "disabled";
+ };
- dspi1: dspi@2110000 {
- compatible = "fsl,vf610-dspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2110000 0x0 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "dspi";
- clocks = <&clockgen 4 0>;
- num-cs = <5>;
- little-endian;
- status = "disabled";
- };
+ dspi1: dspi@2110000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&clockgen 4 0>;
+ num-cs = <5>;
+ little-endian;
+ status = "disabled";
+ };
- dspi2: dspi@2120000 {
- compatible = "fsl,vf610-dspi";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0x2120000 0x0 0x10000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "dspi";
- clocks = <&clockgen 4 0>;
- num-cs = <5>;
- little-endian;
- status = "disabled";
- };
+ dspi2: dspi@2120000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2120000 0x0 0x10000>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&clockgen 4 0>;
+ num-cs = <5>;
+ little-endian;
+ status = "disabled";
+ };
- esdhc0: esdhc@2140000 {
- compatible = "fsl,esdhc";
- reg = <0x0 0x2140000 0x0 0x10000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
- bus-width = <4>;
- status = "disabled";
- };
+ esdhc0: esdhc@2140000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x2140000 0x0 0x10000>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
- esdhc1: esdhc@2150000 {
- compatible = "fsl,esdhc";
- reg = <0x0 0x2150000 0x0 0x10000>;
- interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
- big-endian;
- non-removable;
- bus-width = <4>;
- status = "disabled";
- };
+ esdhc1: esdhc@2150000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x2150000 0x0 0x10000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ big-endian;
+ non-removable;
+ bus-width = <4>;
+ status = "disabled";
+ };
- gpio0: gpio@2300000 {
- compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
- reg = <0x0 0x2300000 0x0 0x10000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- little-endian;
- };
+ gpio0: gpio@2300000 {
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+ reg = <0x0 0x2300000 0x0 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ little-endian;
+ };
- gpio1: gpio@2310000 {
- compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
- reg = <0x0 0x2310000 0x0 0x10000>;
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- little-endian;
- };
+ gpio1: gpio@2310000 {
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+ reg = <0x0 0x2310000 0x0 0x10000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ little-endian;
+ };
- gpio2: gpio@2320000 {
- compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
- reg = <0x0 0x2320000 0x0 0x10000>;
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- little-endian;
- };
+ gpio2: gpio@2320000 {
+ compatible = "fsl,ls1028a-gpio","fsl,qoriq-gpio";
+ reg = <0x0 0x2320000 0x0 0x10000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ little-endian;
+ };
- sata: sata@3200000 {
- compatible = "fsl,ls1028a-ahci";
- reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata base */
- 0x7 0x100520 0x0 0x4>; /* ecc sata addr*/
- reg-names = "sata-base", "ecc-addr";
- interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
+ sata: sata@3200000 {
+ compatible = "fsl,ls1028a-ahci";
+ reg = <0x0 0x3200000 0x0 0x10000 /* ccsr sata
base */
+ 0x7 0x100520 0x0 0x4>; /* ecc
sata addr*/
+ reg-names = "sata-base", "ecc-addr";
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
- cluster1_core0_watchdog: wdt@c000000 {
- compatible = "arm,sp805-wdt";
- reg = <0x0 0xc000000 0x0 0x1000>;
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805-wdt";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ };
};
};
--
2.30.2
