Am 2021-08-31 20:51, schrieb Vladimir Oltean:
On Tue, Aug 31, 2021 at 05:40:19PM +0200, Michael Walle wrote:
This series sync the device tree of the LS1028A SoC with the linux
one.
To ease future debugging and reviewing, we first clean up the existing
one,
removing bogus nodes, moving all CCSR related nodes in /soc and update
the
drivers to accept the offical compatible strings.
This was tested on a sl28 board, but the ls1028a.dtsi sync also
affects the
LS1028A-RDB and -QDS. It would be nice if someone could actually test
it on
such a board.
I didn't sync the device trees for the NXP boards because u-boot
related
things aren't split into its own -u-boot.dtsi file. So I'll leave that
task
to NXP :)
The following patch is a prerequisite for this series:
https://patchwork.ozlabs.org/project/uboot/patch/20210825210510.24766-1-tr...@konsulko.com/
Thanks for the work, this is appreciated.
So this needs a v2, but in general, who do you expect to pick up your
patches?
Mh, I haven't found a rule how patches are picked up in u-boot but most
of the
time they go through the qoriq git tree. Why do you ask?
After reviewing the patches I noticed further cleanup to be done, we
need to replace
phy-mode = "sgmii-2500";
with
phy-mode = "2500base-x";
and
phy-mode = "xfi";
with
phy-mode = "10gbase-r";
and then delete the fsl_enetc.c driver's support for
PHY_INTERFACE_MODE_XFI and PHY_INTERFACE_MODE_XGMII, that's completely
bogus.
Ok, that sounds easy enough. Will pick that up.
-michael
