Provide sysreset driver using the SBI system reset extension.

Signed-off-by: Heinrich Schuchardt <xypron.g...@gmx.de>
---
v3:
        no change
---
 MAINTAINERS                     |  1 +
 arch/riscv/cpu/cpu.c            | 13 ++++-
 arch/riscv/include/asm/sbi.h    |  1 +
 arch/riscv/lib/sbi.c            | 21 ++++++--
 drivers/sysreset/Kconfig        | 11 ++++
 drivers/sysreset/Makefile       |  1 +
 drivers/sysreset/sysreset_sbi.c | 96 +++++++++++++++++++++++++++++++++
 lib/efi_loader/Kconfig          |  2 +-
 8 files changed, 140 insertions(+), 6 deletions(-)
 create mode 100644 drivers/sysreset/sysreset_sbi.c

diff --git a/MAINTAINERS b/MAINTAINERS
index 4cf0c33c5d..88d7aa2bc7 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1017,6 +1017,7 @@ T:        git 
https://source.denx.de/u-boot/custodians/u-boot-riscv.git
 F:     arch/riscv/
 F:     cmd/riscv/
 F:     doc/usage/sbi.rst
+F:     drivers/sysreset/sysreset_sbi.c
 F:     drivers/timer/andes_plmt_timer.c
 F:     drivers/timer/sifive_clint_timer.c
 F:     tools/prelink-riscv.c
diff --git a/arch/riscv/cpu/cpu.c b/arch/riscv/cpu/cpu.c
index c894ac10b5..8e49b6d736 100644
--- a/arch/riscv/cpu/cpu.c
+++ b/arch/riscv/cpu/cpu.c
@@ -6,6 +6,7 @@
 #include <common.h>
 #include <cpu.h>
 #include <dm.h>
+#include <dm/lists.h>
 #include <init.h>
 #include <log.h>
 #include <asm/encoding.h>
@@ -138,7 +139,17 @@ int arch_cpu_init_dm(void)

 int arch_early_init_r(void)
 {
-       return riscv_cpu_probe();
+       int ret;
+
+       ret = riscv_cpu_probe();
+       if (ret)
+               return ret;
+
+       if (IS_ENABLED(CONFIG_SYSRESET_SBI))
+               device_bind_driver(gd->dm_root, "sbi-sysreset",
+                                  "sbi-sysreset", NULL);
+
+       return 0;
 }

 /**
diff --git a/arch/riscv/include/asm/sbi.h b/arch/riscv/include/asm/sbi.h
index e9caa78d17..69cddda245 100644
--- a/arch/riscv/include/asm/sbi.h
+++ b/arch/riscv/include/asm/sbi.h
@@ -154,5 +154,6 @@ void sbi_set_timer(uint64_t stime_value);
 long sbi_get_spec_version(void);
 int sbi_get_impl_id(void);
 int sbi_probe_extension(int ext);
+void sbi_srst_reset(unsigned long type, unsigned long reason);

 #endif
diff --git a/arch/riscv/lib/sbi.c b/arch/riscv/lib/sbi.c
index 77845a73ca..8508041f2a 100644
--- a/arch/riscv/lib/sbi.c
+++ b/arch/riscv/lib/sbi.c
@@ -8,13 +8,14 @@
  */

 #include <common.h>
+#include <efi_loader.h>
 #include <asm/encoding.h>
 #include <asm/sbi.h>

-struct sbiret sbi_ecall(int ext, int fid, unsigned long arg0,
-                       unsigned long arg1, unsigned long arg2,
-                       unsigned long arg3, unsigned long arg4,
-                       unsigned long arg5)
+struct sbiret __efi_runtime sbi_ecall(int ext, int fid, unsigned long arg0,
+                                     unsigned long arg1, unsigned long arg2,
+                                     unsigned long arg3, unsigned long arg4,
+                                     unsigned long arg5)
 {
        struct sbiret ret;

@@ -108,6 +109,18 @@ int sbi_probe_extension(int extid)
        return -ENOTSUPP;
 }

+/**
+ * sbi_srst_reset() - invoke system reset extension
+ *
+ * @type:      type of reset
+ * @reason:    reason for reset
+ */
+void __efi_runtime sbi_srst_reset(unsigned long type, unsigned long reason)
+{
+       sbi_ecall(SBI_EXT_SRST, SBI_EXT_SRST_RESET, type, reason,
+                 0, 0, 0, 0);
+}
+
 #ifdef CONFIG_SBI_V01

 /**
diff --git a/drivers/sysreset/Kconfig b/drivers/sysreset/Kconfig
index ac77ffbc8b..6782331181 100644
--- a/drivers/sysreset/Kconfig
+++ b/drivers/sysreset/Kconfig
@@ -85,6 +85,17 @@ config SYSRESET_PSCI
          Enable PSCI SYSTEM_RESET function call.  To use this, PSCI firmware
          must be running on your system.

+config SYSRESET_SBI
+       bool "Enable support for SBI System Reset"
+       depends on RISCV_SMODE && SBI_V02
+       select SYSRESET_CMD_POWEROFF if CMD_POWEROFF
+       help
+         Enable system reset and poweroff via the SBI system reset extension.
+         If the SBI implementation provides the extension, is board specific.
+         The extension was introduced in version 0.3 of the SBI specification.
+         The SBI system reset driver supports the UEFI ResetSystem() service
+         at runtime.
+
 config SYSRESET_SOCFPGA
        bool "Enable support for Intel SOCFPGA family"
        depends on ARCH_SOCFPGA && (TARGET_SOCFPGA_GEN5 || 
TARGET_SOCFPGA_ARRIA10)
diff --git a/drivers/sysreset/Makefile b/drivers/sysreset/Makefile
index de81c399d7..8e00be0779 100644
--- a/drivers/sysreset/Makefile
+++ b/drivers/sysreset/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SYSRESET_MPC83XX) += sysreset_mpc83xx.o
 obj-$(CONFIG_SYSRESET_MICROBLAZE) += sysreset_microblaze.o
 obj-$(CONFIG_SYSRESET_OCTEON) += sysreset_octeon.o
 obj-$(CONFIG_SYSRESET_PSCI) += sysreset_psci.o
+obj-$(CONFIG_SYSRESET_SBI) += sysreset_sbi.o
 obj-$(CONFIG_SYSRESET_SOCFPGA) += sysreset_socfpga.o
 obj-$(CONFIG_SYSRESET_SOCFPGA_SOC64) += sysreset_socfpga_soc64.o
 obj-$(CONFIG_SYSRESET_TI_SCI) += sysreset-ti-sci.o
diff --git a/drivers/sysreset/sysreset_sbi.c b/drivers/sysreset/sysreset_sbi.c
new file mode 100644
index 0000000000..fec5a66515
--- /dev/null
+++ b/drivers/sysreset/sysreset_sbi.c
@@ -0,0 +1,96 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021, Heinrich Schuchardt <xypron.g...@gmx.de>
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <efi_loader.h>
+#include <log.h>
+#include <sysreset.h>
+#include <asm/sbi.h>
+
+static long __efi_runtime_data have_reset;
+
+static int sbi_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+       enum sbi_srst_reset_type reset_type;
+
+       switch (type) {
+       case SYSRESET_WARM:
+               reset_type = SBI_SRST_RESET_TYPE_WARM_REBOOT;
+               break;
+       case SYSRESET_COLD:
+               reset_type = SBI_SRST_RESET_TYPE_COLD_REBOOT;
+               break;
+       case SYSRESET_POWER_OFF:
+               reset_type = SBI_SRST_RESET_TYPE_SHUTDOWN;
+               break;
+       default:
+               log_err("SBI has no system reset extension\n");
+               return -ENOSYS;
+       }
+
+       sbi_srst_reset(reset_type, SBI_SRST_RESET_REASON_NONE);
+
+       return -EINPROGRESS;
+}
+
+efi_status_t efi_reset_system_init(void)
+{
+       return EFI_SUCCESS;
+}
+
+void __efi_runtime EFIAPI efi_reset_system(enum efi_reset_type type,
+                                          efi_status_t reset_status,
+                                          unsigned long data_size,
+                                          void *reset_data)
+{
+       enum sbi_srst_reset_type reset_type;
+       enum sbi_srst_reset_reason reset_reason;
+
+       if (have_reset)
+               switch (type) {
+               case SYSRESET_COLD:
+                       reset_type = SBI_SRST_RESET_TYPE_COLD_REBOOT;
+                       break;
+               case SYSRESET_POWER_OFF:
+                       reset_type = SBI_SRST_RESET_TYPE_SHUTDOWN;
+                       break;
+               default:
+                       reset_type = SBI_SRST_RESET_TYPE_WARM_REBOOT;
+                       break;
+       }
+
+       if (reset_status == EFI_SUCCESS)
+               reset_reason = SBI_SRST_RESET_REASON_NONE;
+       else
+               reset_reason = SBI_SRST_RESET_REASON_SYS_FAILURE;
+
+       sbi_srst_reset(reset_type, reset_reason);
+
+       while (1)
+               ;
+}
+
+static int sbi_sysreset_probe(struct udevice *dev)
+{
+       have_reset = sbi_probe_extension(SBI_EXT_SRST);
+       if (have_reset)
+               return 0;
+
+       log_warning("SBI has no system reset extension\n");
+       return -ENOENT;
+}
+
+static struct sysreset_ops sbi_sysreset_ops = {
+       .request = sbi_sysreset_request,
+};
+
+U_BOOT_DRIVER(sbi_sysreset) = {
+       .name = "sbi-sysreset",
+       .id = UCLASS_SYSRESET,
+       .ops = &sbi_sysreset_ops,
+       .probe = sbi_sysreset_probe,
+};
diff --git a/lib/efi_loader/Kconfig b/lib/efi_loader/Kconfig
index dacc3b5881..36985fce2c 100644
--- a/lib/efi_loader/Kconfig
+++ b/lib/efi_loader/Kconfig
@@ -297,7 +297,7 @@ config EFI_HAVE_RUNTIME_RESET
        bool
        default y
        depends on ARCH_BCM283X || FSL_LAYERSCAPE || PSCI_RESET || \
-                  SANDBOX || SYSRESET_X86
+                  SANDBOX || SYSRESET_SBI || SYSRESET_X86

 config EFI_GRUB_ARM32_WORKAROUND
        bool "Workaround for GRUB on 32bit ARM"
--
2.30.2

Reply via email to