HI Patrick On 9/14/21 2:14 PM, Patrick Delaunay wrote: > Continue to use the "ssbl" name for GPT partition of secondary boot > stage = U-Boot for basic boot with SPL to avoid to disturb existing user. > > The "fip" partition name is only used for TFA_BOOT with FIP, it is a TF-A > BL2 requirement; it the default configuration for STMicroelectronics > boards. > > Fixes: b73e8bf453f8 ("arm: stm32mp: add defconfig for trusted boot with FIP") > Signed-off-by: Patrick Delaunay <patrick.delau...@foss.st.com> > --- > > arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi | 4 +++- > arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi | 4 +++- > 2 files changed, 6 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi > b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi > index 0101962ea5..15a04ae927 100644 > --- a/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi > +++ b/arch/arm/dts/stm32mp157a-dk1-u-boot.dtsi > @@ -21,11 +21,13 @@ > st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | > GPIO_PULL_UP)>; > }; > > -#ifdef CONFIG_STM32MP15x_STM32IMAGE > +#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL) > config { > u-boot,mmc-env-partition = "ssbl"; > }; > +#endif > > +#ifdef CONFIG_STM32MP15x_STM32IMAGE > /* only needed for boot with TF-A, witout FIP support */ > firmware { > optee { > diff --git a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi > b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi > index 32777384c6..408abaf52f 100644 > --- a/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi > +++ b/arch/arm/dts/stm32mp157c-ed1-u-boot.dtsi > @@ -20,11 +20,13 @@ > st,stm32prog-gpios = <&gpioa 14 (GPIO_ACTIVE_LOW | > GPIO_PULL_UP)>; > }; > > -#ifdef CONFIG_STM32MP15x_STM32IMAGE > +#if defined(CONFIG_STM32MP15x_STM32IMAGE) || defined(CONFIG_SPL) > config { > u-boot,mmc-env-partition = "ssbl"; > }; > +#endif > > +#ifdef CONFIG_STM32MP15x_STM32IMAGE > /* only needed for boot with TF-A, witout FIP support */ > firmware { > optee { > Reviewed-by: Patrice Chotard <patrice.chot...@foss.st.com>
Thanks Patrice