On 2021/9/26 0:49, Oleksandr Suvorov wrote:
From: Michael Scott <[email protected]>
This allows removal of the OCOTP driver when SPL is enabled.
Disabling OCOTP reduces SPL size efficiently.
Signed-off-by: Michael Scott <[email protected]>
Co-developed-by: Oleksandr Suvorov <[email protected]>
Signed-off-by: Oleksandr Suvorov <[email protected]>
---
drivers/misc/Kconfig | 9 +++++++++
drivers/misc/Makefile | 2 +-
2 files changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 997b713221..4d6a4384f1 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -233,6 +233,15 @@ config MXC_OCOTP
Programmable memory pages that are stored on the some
Freescale i.MX processors.
+config SPL_MXC_OCOTP
+ bool "Enable MXC OCOTP driver in SPL"
+ depends on SPL && (ARCH_IMX8M || ARCH_MX6 || ARCH_MX7 || ARCH_MX7ULP ||
ARCH_VF610)
+ default y
+ help
+ If you say Y here, you will get support for the One Time
+ Programmable memory pages, that are stored on some
+ Freescale i.MX processors, in SPL.
+
config NUVOTON_NCT6102D
bool "Enable Nuvoton NCT6102D Super I/O driver"
help
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index b64cd2a4de..3fb367b34a 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -50,7 +50,7 @@ obj-$(CONFIG_IMX8ULP) += imx8ulp/
obj-$(CONFIG_LED_STATUS) += status_led.o
obj-$(CONFIG_LED_STATUS_GPIO) += gpio_led.o
obj-$(CONFIG_MPC83XX_SERDES) += mpc83xx_serdes.o
-obj-$(CONFIG_MXC_OCOTP) += mxc_ocotp.o
+obj-$(CONFIG_$(SPL_)MXC_OCOTP) += mxc_ocotp.o
obj-$(CONFIG_MXS_OCOTP) += mxs_ocotp.o
obj-$(CONFIG_NUVOTON_NCT6102D) += nuvoton_nct6102d.o
obj-$(CONFIG_P2SB) += p2sb-uclass.o
Reviewed-by: Peng Fan <[email protected]>
