Jason Kridner wrote, on 11/05/2010 01:46 AM: > From: Koen Kooi<k...@dominion.thruhere.net> > > Patch was updated by Jason Kridner<jkrid...@beagleboard.org>: > * Use tabs to match style of other board revisions > * Only include board revisions that exist > * Default to the same configuration as the latest revision, but > without setting 'beaglerev' > > Signed-off-by: Jason Kridner<jkrid...@beagleboard.org> not signed-off-by: Koen?
> --- > board/ti/beagle/beagle.c | 20 +++++++++++++++++++- > board/ti/beagle/beagle.h | 3 ++- > 2 files changed, 21 insertions(+), 2 deletions(-) > > diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c > index 520e57d..93c452e 100644 > --- a/board/ti/beagle/beagle.c > +++ b/board/ti/beagle/beagle.c > @@ -176,7 +176,7 @@ int misc_init_r(void) > TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, > TWL4030_PM_RECEIVER_DEV_GRP_P1); > break; > - case REVISION_XM: > + case REVISION_XM_A: > printf("Beagle xM Rev A\n"); > setenv("beaglerev", "xMA"); > setenv("mpurate", "1000"); > @@ -187,8 +187,26 @@ int misc_init_r(void) > TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, > TWL4030_PM_RECEIVER_DEV_GRP_P1); > break; > + case REVISION_XM_B: > + printf("Beagle xM Rev B\n"); > + setenv("beaglerev", "xMB"); > + setenv("mpurate", "1000"); > + MUX_BEAGLE_XM(); > + /* Set VAUX2 to 1.8V for EHCI PHY */ > + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, > + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, > + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, > + TWL4030_PM_RECEIVER_DEV_GRP_P1); > + break; > default: > printf("Beagle unknown 0x%02x\n", get_board_revision()); > + setenv("mpurate", "1000"); It looks to me looking at the file that mpurate usage is CPU based and NOT board based.. maybe you should use the cpu idendity to decide on mpurate instead? > + MUX_BEAGLE_XM(); > + /* Set VAUX2 to 1.8V for EHCI PHY */ > + twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VAUX2_DEDICATED, > + TWL4030_PM_RECEIVER_VAUX2_VSEL_18, > + TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, > + TWL4030_PM_RECEIVER_DEV_GRP_P1); > } > > switch (get_expansion_id()) { > diff --git a/board/ti/beagle/beagle.h b/board/ti/beagle/beagle.h > index 7d8dee0..fa893c4 100644 > --- a/board/ti/beagle/beagle.h > +++ b/board/ti/beagle/beagle.h > @@ -37,7 +37,8 @@ const omap3_sysinfo sysinfo = { > #define REVISION_AXBX 0x7 > #define REVISION_CX 0x6 > #define REVISION_C4 0x5 > -#define REVISION_XM 0x0 > +#define REVISION_XM_A 0x0 > +#define REVISION_XM_B 0x1 > > /* > * IEN - Input Enable -- Regards, Nishanth Menon _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot