[RFC 2/3] phy: nop-phy: Enable reset-gpios support

[Adam Ford]

Some usb-nop-xceiv devices use a gpio to put them
in reset.  Add a reset function to put them into that
state, and have the init function take them out of reset

Signed-off-by: Adam Ford <aford...@gmail.com>

diff --git a/drivers/phy/nop-phy.c b/drivers/phy/nop-phy.c
index 9f12ebc062..be993a764f 100644
--- a/drivers/phy/nop-phy.c
+++ b/drivers/phy/nop-phy.c
@@ -10,11 +10,24 @@
 #include <dm/device.h>
 #include <dm/device_compat.h>
 #include <generic-phy.h>
+#include <asm-generic/gpio.h>
 
 struct nop_phy_priv {
        struct clk_bulk bulk;
+       struct gpio_desc reset_gpio;
 };
 
+static int nop_phy_reset(struct phy *phy)
+{
+       struct nop_phy_priv *priv = dev_get_priv(phy->dev);
+
+       /* Return if there is no gpio since it's optional */
+       if (!dm_gpio_is_valid(&priv->reset_gpio))
+               return 0;
+
+       return dm_gpio_set_value(&priv->reset_gpio, false);
+}
+
 static int nop_phy_init(struct phy *phy)
 {
        struct nop_phy_priv *priv = dev_get_priv(phy->dev);
@@ -22,7 +35,12 @@ static int nop_phy_init(struct phy *phy)
        if (CONFIG_IS_ENABLED(CLK))
                return clk_enable_bulk(&priv->bulk);
 
-       return 0;
+       /* Return if there is no gpio since it's optional */
+       if (!dm_gpio_is_valid(&priv->reset_gpio))
+               return 0;
+
+       /* If there is a reset gpio, take it out of reset */
+       return dm_gpio_set_value(&priv->reset_gpio, true);
 }
 
 static int nop_phy_probe(struct udevice *dev)
@@ -38,6 +56,12 @@ static int nop_phy_probe(struct udevice *dev)
                }
        }
 
+       ret = gpio_request_by_name(dev, "reset-gpios", 0,
+                                  &priv->reset_gpio,
+                                  GPIOD_IS_OUT);
+       if (ret != -ENOENT)
+               return ret;
+
        return 0;
 }
 
@@ -49,6 +73,7 @@ static const struct udevice_id nop_phy_ids[] = {
 
 static struct phy_ops nop_phy_ops = {
        .init = nop_phy_init,
+       .reset = nop_phy_reset,
 };
 
 U_BOOT_DRIVER(nop_phy) = {
-- 
2.25.1