Hi Tim On Thu, 2021-10-07 at 08:52 -0700, Tim Harvey wrote: > )On Wed, Oct 6, 2021 at 2:44 PM Marcel Ziswiler <mar...@ziswiler.com> wrote: > > > > On Wed, 2021-10-06 at 13:17 -0700, Tim Harvey wrote: > > > Use binman to pack images. > > > > > > Note that imx8mm_venice supports several boards via multiple DTB's thus > > > in the fit node we must use: > > > - fit,fdt-list = "of-list" > > > - fdt-SEQ > > > - config-SEQ > > > > > > Signed-off-by: Tim Harvey <thar...@gateworks.com> > > > > Reviewed-by: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > > > --- > > > v2: > > > - rebase on origin/mater > > > > You probably meant master (;-p). > > > > Rest look legit. > > Marcel, > > Thanks for the review. I will submit a v3 as I forgot to include a few > other patches required for this that I had in v1 (using a common > u-boot.dtsi file) > > I am seeing 'WARNING 'u-boot-spl-ddr.bin' not found, resulting binary > is not-functional' until I do a 'make' a second time so there is some > sort of race condition with the binman blobs.
Yes, remember, this still needs Peng's Makefile fix [1] as otherwise, it may not quite generate all binman artefacts in the right order as discussed here [2]. [1] https://marc.info/?l=u-boot&m=162908373904742 [2] https://marc.info/?l=u-boot&m=162945614207220 Cheers Marcel