Hi Tim On Tue, 2021-10-12 at 12:46 -0700, Tim Harvey wrote: > On Sat, Oct 9, 2021 at 1:43 PM Marcel Ziswiler <mar...@ziswiler.com> wrote: > > > > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > > > > An assortment of fixes and improvements like an Ethernet PHY > > configuration fix, DEK blob encapsulation preparation, migration to > > using binman to pack images, SLEEP_MOCI# enablement, dropping of V1.0 > > hardware support [1], renaming kernel image variable, using preboot > > for fdtfile evaluation and watchdog pinctrl fix. > > > > Note that this series is applied on top of Peng's Makefile fix [2] as > > otherwise, it may not quite generate all binman artefacts in the right > > order as discussed here [3]. > > > > [1] https://developer.toradex.com/verdin-sample-phase-over > > [2] https://marc.info/?l=u-boot&m=162908373904742 > > [3] https://marc.info/?l=u-boot&m=162945614207220 > > > > Changes in v6: > > - New patch re-ordering fdt nodes and properties. > > - Update commit message as requested by Wolfgang. > > > > Changes in v5: > > - Drop device tree part already done by Marek's patch. > > - Add another fixes tag as his patch forgot the board code part. > > - Re-based on top of u-boot-imx, master yet again. > > > > Changes in v4: > > - Add Heiko Schocher's reviewed-by tag. > > - Fix copyright periods. > > - Re-based. > > > > Changes in v3: > > - Case fold hex string. > > - Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from > > imx8mm-evk and postpone further improvements to after migrating to a > > common binman config as agreed with Frieder and Simon. > > - New patch cleaning up include order. > > - Add Fabio's reviewed-by tag. > > - Fix patch. > > - Add missing apalis-imx8 part. > > - While at it update copyright year resp. period. > > - Fix closing endif comment. > > > > Changes in v2: > > - Explicitly pass filename to binman when generating binaries as > > suggested by Heiko. > > - Use proper intermediate binary u-boot-spl-ddr.bin for imximage as > > pointed out by Heiko. > > - Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation") > > as a similar fix was already refused earlier. > > - New patch allows booting recent embedded Linux BSPs. > > - New patch addressing dynamic fdtfile definition. > > - New patch fixing watchdog pinctrl issue. > > > > Igor Opaniuk (1): > > verdin-imx8mm: use preboot for fdtfile evaluation > > > > Marcel Ziswiler (7): > > imx8m: clean-up kconfig indentation > > verdin-imx8mm: fix ethernet > > ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation > > arm64: dts: imx8mm-verdin-u-boot.dtsi: alphabetically re-order > > verdin-imx8mm: switch to use binman to pack images > > verdin-imx8mm: clean-up include order > > verdin-imx8mm: fix watchdog pinctrl issue > > > > Max Krummenacher (2): > > verdin-imx8mm: enable sleep_moci output > > verdin-imx8mm: drop support for v1.0 hardware > > > > Oleksandr Suvorov (1): > > include/configs: apalis-imx8/verdin-imx8mm: rename kernel image > > variable > > > > arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 147 +++++++++++++++++++- > > arch/arm/dts/imx8mm-verdin.dts | 18 +++ > > arch/arm/mach-imx/imx8m/Kconfig | 21 +-- > > board/toradex/verdin-imx8mm/imximage.cfg | 11 +- > > board/toradex/verdin-imx8mm/verdin-imx8mm.c | 81 +---------- > > configs/verdin-imx8mm_defconfig | 6 +- > > doc/board/toradex/verdin-imx8mm.rst | 53 ++++--- > > include/configs/apalis-imx8.h | 6 +- > > include/configs/verdin-imx8mm.h | 10 +- > > 9 files changed, 220 insertions(+), 133 deletions(-) > > > > -- > > 2.26.2 > > > > Marcel, > > I've tested your series with mx8mm-venice and did not see any issues.
Note that I have currently several patch series in-flight. I assume you meant this to go here [1] instead, not? > Tested-by: Tim Harvey <thar...@gateworks.com> for imx8mm-venice-* boards > > Thanks, the common u-boot.dtsi is nice to see! Thanks! > I have a couple of patches that have not been picked up by Stefano yet > due to I believe merge conflicts becuase his imx tree is behind master > with respect to some of the Kconfig patches. You are likely in the > same boat. Yeah, however, with his pulls from Thursday evening imx/master is now based on commit ea67f467a43 ("Merge branch '2021-10-06-assorted-improvements'") which is very close to todays origin/master. So I don't think there should be any more conflicts if your stuff is re-based either on top of imx/master or origin/master. > Stefano, is it best for me to rebase my 'imx8mm_venice: switch to use > binman to pack images' and 'board: gateworks: venice: add > imx8mn-gw7902 support' patches on your tree or are you going to be > merging in origin/master soon? > > Best regards, > > Tim [1] https://marc.info/?l=u-boot&m=163372696806292 Cheers Marcel