[PATCH v5 12/28] arm: dts: ls1028a: move SATA and USB controller nodes into /soc

[Michael Walle]

While inserting them into the new location, keep them sorted by the
register base offset just like in the linux kernel device tree.

Signed-off-by: Michael Walle <mich...@walle.cc>
Reviewed-by: Vladimir Oltean <vladimir.olt...@nxp.com>
---
 arch/arm/dts/fsl-ls1028a.dtsi | 50 +++++++++++++++++------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 9f466554e9..7d18085615 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -174,31 +174,6 @@
                };
        };
 
-       usb1: usb3@3100000 {
-               compatible = "fsl,layerscape-dwc3";
-               reg = <0x0 0x3100000 0x0 0x10000>;
-               interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-               dr_mode = "host";
-               status = "disabled";
-       };
-
-       usb2: usb3@3110000 {
-               compatible = "fsl,layerscape-dwc3";
-               reg = <0x0 0x3110000 0x0 0x10000>;
-               interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-               dr_mode = "host";
-               status = "disabled";
-       };
-
-       sata: sata@3200000 {
-               compatible = "fsl,ls1028a-ahci";
-               reg = <0x0 0x3200000 0x0 0x10000        /* ccsr sata base */
-                      0x7 0x100520  0x0 0x4>;          /* ecc sata addr*/
-               reg-names = "sata-base", "ecc-addr";
-               interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-               status = "disabled";
-       };
-
        cluster1_core0_watchdog: wdt@c000000 {
                compatible = "arm,sp805-wdt";
                reg = <0x0 0xc000000 0x0 0x1000>;
@@ -484,5 +459,30 @@
                        #interrupt-cells = <2>;
                        little-endian;
                };
+
+               usb1: usb3@3100000 {
+                       compatible = "fsl,layerscape-dwc3";
+                       reg = <0x0 0x3100000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+                       dr_mode = "host";
+                       status = "disabled";
+               };
+
+               usb2: usb3@3110000 {
+                       compatible = "fsl,layerscape-dwc3";
+                       reg = <0x0 0x3110000 0x0 0x10000>;
+                       interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+                       dr_mode = "host";
+                       status = "disabled";
+               };
+
+               sata: sata@3200000 {
+                       compatible = "fsl,ls1028a-ahci";
+                       reg = <0x0 0x3200000 0x0 0x10000        /* ccsr sata 
base */
+                              0x7 0x100520  0x0 0x4>;          /* ecc sata 
addr*/
+                       reg-names = "sata-base", "ecc-addr";
+                       interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+                       status = "disabled";
+               };
        };
 };
-- 
2.30.2