On Wed, 13 Oct 2021 at 07:11, Patrick Delaunay <[email protected]> wrote: > > Use binman to add the stm32image header on SPL binary for basic boot > or on U-Boot binary when it is required, i.e. for TF-A boot without FIP > support, when CONFIG_STM32MP15x_STM32IMAGE is activated. > > The "binman" tool is the recommended tool for specific image generation. > This patch allows to suppress the config.mk file and it is a preliminary > step to manage FIT generation with binman. > > The init_r parsing of U-Boot device tree to search the binman > information is not required for STM32MP15, so the binman library > can be removed in U-Boot (CONFIG_BINMAN_FDT is deactivated). > > Signed-off-by: Patrick Delaunay <[email protected]> > --- > > Changes in v2: > - deactivate CONFIG_BINMAN_FDT > > arch/arm/dts/stm32mp15-u-boot.dtsi | 29 +++++++++++++++++++ > arch/arm/mach-stm32mp/Kconfig | 1 + > arch/arm/mach-stm32mp/config.mk | 29 ------------------- > ...stm32mp15-icore-stm32mp1-ctouch2_defconfig | 1 + > ...tm32mp15-icore-stm32mp1-edimm2.2_defconfig | 1 + > ...-microgea-stm32mp1-microdev2-of7_defconfig | 1 + > ...mp15-microgea-stm32mp1-microdev2_defconfig | 1 + > configs/stm32mp15_basic_defconfig | 1 + > configs/stm32mp15_defconfig | 1 + > configs/stm32mp15_dhcom_basic_defconfig | 1 + > configs/stm32mp15_dhcor_basic_defconfig | 1 + > configs/stm32mp15_trusted_defconfig | 1 + > 12 files changed, 39 insertions(+), 29 deletions(-) > delete mode 100644 arch/arm/mach-stm32mp/config.mk
Reviewed-by: Simon Glass <[email protected]> Suggest lower-case hex for the addresses though.
