On Sat, 2021-10-23 at 01:15 +0200, Marcel Ziswiler wrote: > From: Marcel Ziswiler <marcel.ziswi...@toradex.com> > > > With the move to using binman to generate SPL aka u-boot-spl-ddr.bin and > U-Boot proper aka u-boot.itb every board now covers such configuration > in its own U-Boot specific device tree include. Move the comon part of > that configuration to the common imx8mm-u-boot.dtsi include file. > > The initial patch fixes an issue with intermediate binary naming for the > imx8mm-cl-iot-gate. And subsequent patches further clean up that dtsi. > > This series is based on my refresh of Adam's imx8mm_beacon switch to > binman patch [1], my refresh of Michael's sl28 patches [2]
Sorry, there was a misunderstanding on my side. This i.MX 8M Mini patch series, of course, does not depend on anything sl28 which is fsl-qoriq based hardware. Thanks to Michael for pointing that out and sorry again! > and Tim's > switching imx8mm_venice to using binman to pack images [3]. > > [1] https://marc.info/?l=u-boot&m=163493902915471 > [2] https://marc.info/?l=u-boot&m=163494122816224 > [3] https://marc.info/?l=u-boot&m=163355140309636 > > Changes in v3: > - Integrated imx8mm_beacon as well. > - Re-based on top of imx/master. > > Changes in v2: > - New patch preparing cl-iot-gate. > - New patch preparing cl-iot-gate. > - Morph common binman dtsi into regular common u-boot dtsi as discussed > on mailing list. > - Re-based. > - Rather than doing that clean-up to the separate binman dtsi now do it > to the common u-boot dtsi one. > - Rather than doing that clean-up to the separate binman dtsi now do it > to the common u-boot dtsi one. > - Rather than doing that clean-up to the separate binman dtsi now do it > to the common u-boot dtsi one. > > Changes in v1: > - This was suggested by Simon on my earlier patch set upon which we > decided to first break this up into a common binman dtsi and then > subsequently do such further improvements. > > Marcel Ziswiler (7): > imx8mm-cl-iot-gate: fix imximage intermediate binary naming > arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: alphabetically re-order > arm64: dts: imx8mm-cl-iot-gate-u-boot.dtsi: use common > imx8mm-u-boot.dtsi > arm64: dts: imx8mm: use common binman configuration > arm64: dts: imx8mm-u-boot.dtsi: alphabetically re-order properties > arm64: dts: imx8mm-u-boot.dtsi: explicitly add spl filename > arm64: dts: imx8mm-u-boot.dtsi: improve odd blob-ext naming > > arch/arm/dts/imx8mm-beacon-kit-u-boot.dtsi | 122 ---------- > .../dts/imx8mm-cl-iot-gate-optee-u-boot.dtsi | 209 ++++-------------- > arch/arm/dts/imx8mm-cl-iot-gate-u-boot.dtsi | 188 +++------------- > arch/arm/dts/imx8mm-evk-u-boot.dtsi | 123 ----------- > arch/arm/dts/imx8mm-u-boot.dtsi | 149 ++++++++++++- > arch/arm/dts/imx8mm-venice-u-boot.dtsi | 119 ---------- > arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 122 +--------- > .../imximage-8mm-lpddr4.cfg | 2 +- > 8 files changed, 212 insertions(+), 822 deletions(-)