> -----Original Message----- > From: Marek Behún <ka...@kernel.org> > Sent: Monday, October 25, 2021 7:01 AM > To: Roman Bacik <roman.ba...@broadcom.com> > Cc: U-Boot Mailing List <u-boot@lists.denx.de>; Bharat Gooty > <bharat.go...@broadcom.com>; Bin Meng <bmeng...@gmail.com>; Franck > LENORMAND <franck.lenorm...@nxp.com>; Heinrich Schuchardt > <xypron.g...@gmx.de>; Kory Maincent <kory.mainc...@bootlin.com>; > Michal Simek <michal.si...@xilinx.com>; Patrick Delaunay > <patrick.delau...@foss.st.com>; Peng Fan <peng....@nxp.com>; Priyanka > Jain <priyanka.j...@nxp.com>; Rayagonda Kokatanur > <rayagonda.kokata...@broadcom.com>; Sean Anderson > <sean.ander...@seco.com>; Simon Glass <s...@chromium.org> > Subject: Re: [PATCH v2 2/2] cmd: brcm: netXtreme commands > > On Fri, 22 Oct 2021 16:23:33 -0700 > Roman Bacik <roman.ba...@broadcom.com> wrote: > > > From: Bharat Gooty <bharat.go...@broadcom.com> > > > > Following netXtreme commands are supported:- > > Device probe, remove, supported speeds, get/set speeds and > > get/set MAC address. > > NAK. > > - "bnxt <bnxt_eth#> get mac > > U-Boot uses the ethaddr and ethNaddr environment variables for MAC > addresses. You don't need a new custom command for that when there is > a generic mechanism for this. > > - "<bnxt_eth#> probe" / "<bnxt_eth#> remove" > > You also shouldn't need a command for driver probe / remove. DM should > probe your driver automatically. And if you need it for debugging, > please add such subcommand to the dm command. > > - "bnxt <bnxt_eth#> get supported_speed" > "bnxt <bnxt_eth#> get link_speed" > > These should be available via the mdio command when you register your > PHY driver via appropriate API. > > Marek
Hi Marek, Thank you very much for your feedback. We have two Ethernet drivers. One is 10/100/1000 MB rmii driver, which is being used as you have described. The second one is this 10/100 GB bnxt driver, which is probed and managed on demand with these netXtreme commands. We will have a look and address your comments. Thanks, Roman -- This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.
smime.p7s
Description: S/MIME Cryptographic Signature
