On Fri, Nov 12, 2021 at 9:43 PM Alper Nebi Yasak <[email protected]> wrote: > > On 12/11/2021 19:39, Tom Rini wrote: > > On Fri, Nov 12, 2021 at 11:35:15AM +0300, Aleksei wrote: > > > >> Hi U-boot developers, > >> I'm booting RockPro64 by writing compiled u-boot-rockchip.bin to SD card > >> offset > >> 64 as described in doc/board/rockchip/rockchip.rst. There is a USB flash > >> drive > >> plugged into USB2 port containing ext4 filesystem with > >> extlinux/exlinux.conf > >> and a kernel+initrd images. This setup boots fine on 02ce99ec91 but not on > >> the > >> next 3ae64582fb. It gets stuck on "Booting using the fdt blob at > >> 0x1f000000". > >> > >> Let me know if I can help debug this. I have a "daily driver" RockPro64 > >> v2.1, > >> can pull from git repos/branches or apply patches to source tree - > >> whichever > >> you prefer. > > > > So the commit in question is enabling USB3.0 support on the board. > > Jagan, Kevar? > > This is probably the same inno-usb2 hang [1] that happens on other > RK3399 boards.
Yes, that will be it. > [1] > https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
