This patch adds default defconfig for u-boot update version, the u-boot update defconfig is a copy of the default (factory) defconfig with: - adapted text base and environment addresses - explicit flag that this is a field updated u-boot version
At the time of implementation this version is only used to verify the update procedure, in future depend on the needs this defconfig can be extended with additional options. Signed-off-by: Aleksandar Gerasimovski <aleksandar.gerasimov...@hitachienergy.com> --- board/keymile/pg-wcom-ls102xa/MAINTAINERS | 1 + configs/pg_wcom_expu1_update_defconfig | 83 +++++++++++++++++++++++++++++++ 2 files changed, 84 insertions(+) create mode 100644 configs/pg_wcom_expu1_update_defconfig diff --git a/board/keymile/pg-wcom-ls102xa/MAINTAINERS b/board/keymile/pg-wcom-ls102xa/MAINTAINERS index 9fabad1..33db2b2 100644 --- a/board/keymile/pg-wcom-ls102xa/MAINTAINERS +++ b/board/keymile/pg-wcom-ls102xa/MAINTAINERS @@ -9,5 +9,6 @@ F: include/configs/pg-wcom-expu1.h F: configs/pg_wcom_seli8_defconfig F: configs/pg_wcom_seli8_update_defconfig F: configs/pg_wcom_expu1_defconfig +F: configs/pg_wcom_expu1_update_defconfig F: arch/arm/dts/ls1021a-pg-wcom-seli8.dts F: arch/arm/dts/ls1021a-pg-wcom-expu1.dts diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig new file mode 100644 index 0000000..0fd5ebc --- /dev/null +++ b/configs/pg_wcom_expu1_update_defconfig @@ -0,0 +1,83 @@ +CONFIG_ARM=y +CONFIG_SKIP_LOWLEVEL_INIT=y +CONFIG_TARGET_PG_WCOM_EXPU1=y +CONFIG_PG_WCOM_UBOOT_UPDATE_SUPPORTED=y +CONFIG_PG_WCOM_UBOOT_UPDATE=y +CONFIG_SYS_TEXT_BASE=0x60240000 +CONFIG_SYS_MALLOC_LEN=0x1004000 +CONFIG_NR_DRAM_BANKS=1 +CONFIG_KM_DEF_NETDEV="eth2" +CONFIG_KM_COMMON_ETH_INIT=y +CONFIG_PIGGY_MAC_ADDRESS_OFFSET=3 +CONFIG_SYS_MEMTEST_START=0x80000000 +CONFIG_SYS_MEMTEST_END=0x9fffffff +CONFIG_ENV_SIZE=0x4000 +CONFIG_ENV_SECT_SIZE=0x20000 +CONFIG_SYS_I2C_MXC_I2C1=y +CONFIG_SYS_I2C_MXC_I2C2=y +CONFIG_SYS_I2C_MXC_I2C3=y +CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1" +CONFIG_BOOTCOUNT_BOOTLIMIT=3 +CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +CONFIG_AHCI=y +CONFIG_DISTRO_DEFAULTS=y +CONFIG_SYS_LOAD_ADDR=0x82000000 +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_OF_STDOUT_VIA_ALIAS=y +CONFIG_BOOTDELAY=3 +CONFIG_AUTOBOOT_KEYED=y +CONFIG_AUTOBOOT_STOP_STR=" " +CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" +CONFIG_USE_BOOTARGS=y +CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0" +CONFIG_SILENT_CONSOLE=y +CONFIG_LAST_STAGE_INIT=y +CONFIG_MISC_INIT_R=y +CONFIG_CMD_IMLS=y +CONFIG_CMD_GREPENV=y +CONFIG_CMD_MEMINFO=y +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_GPT=y +CONFIG_CMD_I2C=y +CONFIG_CMD_NAND=y +CONFIG_CMD_NAND_TRIMFFS=y +CONFIG_CMD_CRAMFS=y +CONFIG_CMD_MTDPARTS=y +CONFIG_MTDIDS_DEFAULT="nor0=60000000.nor,nand0=68000000.flash" +CONFIG_MTDPARTS_DEFAULT="mtdparts=60000000.nor:128k(rcw),128k(qe),128k(envred),128k(env),512k(res),1m(u-boot),128k(redenvred),128k(redenv),1m(redu-boot),-(ubi0);68000000.flash:-(ubi1)" +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_ENV_OVERWRITE=y +CONFIG_ENV_IS_IN_FLASH=y +CONFIG_SYS_REDUNDAND_ENVIRONMENT=y +CONFIG_ENV_ADDR=0x60220000 +CONFIG_ENV_ADDR_REDUND=0x60200000 +CONFIG_DM=y +CONFIG_BOOTCOUNT_LIMIT=y +CONFIG_DDR_CLK_FREQ=50000000 +CONFIG_SYS_FSL_DDR3=y +CONFIG_SYS_I2C_LEGACY=y +# CONFIG_MMC is not set +CONFIG_MTD=y +CONFIG_MTD_NOR_FLASH=y +CONFIG_FLASH_CFI_DRIVER=y +CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y +CONFIG_FLASH_CFI_MTD=y +CONFIG_SYS_FLASH_CFI=y +CONFIG_MTD_RAW_NAND=y +CONFIG_NAND_FSL_IFC=y +CONFIG_SYS_NAND_ONFI_DETECTION=y +CONFIG_PHY_MARVELL=y +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y +CONFIG_PHY_GIGE=y +CONFIG_MII=y +CONFIG_TSEC_ENET=y +CONFIG_SYS_QE_FW_ADDR=0x60020000 +CONFIG_SPECIFY_CONSOLE_INDEX=y +CONFIG_DM_SERIAL=y +CONFIG_SYS_NS16550=y +CONFIG_VERSION_VARIABLE=y -- 1.8.3.1
