Hi Tom,
Please pull these changes to your tree. CI loop doesn't show any issue
with these patches.
Thanks,
Michal
The following changes since commit fb1018106a7bbb1a0d723029f6760b1b1b4d306d:
Merge branch '2021-10-19-assorted-changes' (2021-10-19 20:45:12 -0400)
are available in the Git repository at:
g...@source.denx.de:u-boot/custodians/u-boot-microblaze.git
tags/xilinx-for-v2022.01-rc3
for you to fetch changes up to 11c0255cd8a7177e2b714040efcfd51844cb5d8e:
xilinx: zynqmp: fix ZYNQMP_RESTORE_JTAG check (2021-11-15 15:59:33 +0100)
----------------------------------------------------------------
Xilinx changes for v2022.01-rc3
sdhci:
- Fix emmc mini case with missing firmware interface
zynqmp:
- Restore JTAG interface if required
- Allow overriding board name
- Add support for DLC21
- Fix one fallthrought statement description
- Use config macro instead of name duplication
- Save multiboot to variable
firmware:
- Handle ipi_req errors better
- Use local buffer in case user doesn't need it instead of NULL/0 location
spi:
- gqsi: Fix write issue at low frequencies
net:
- gem: Disable broadcasts
----------------------------------------------------------------
Ashok Reddy Soma (1):
spi: zynqmp_gqspi: Fix write issue at low frequencies
Jorge Ramirez-Ortiz (1):
zynqmp: restore the jtag interface
Liam Beguin (1):
arm64: zynqmp: allow overriding board name
Michal Simek (9):
arm64: zynqmp: Add support for DLC21 (Smartlynq+) board
arm64: zynqmp: Fix sgmii clock input freq for p-a2197
net: gem: Disable broadcast setting
firmware: zynqmp: Handle errors from ipi_req properly
firmware: zynqmp: fix write to an uninitialised pointer in ipi_req()
xilinx: zynqmp: Handle fallthrough statement properly
xilinx: zynqmp: Use CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
xilinx: zynqmp: Save multiboot as variable
arm64: zynqmp: Replace comma by semicolon
Ricardo Salveti (1):
xilinx: zynqmp: fix ZYNQMP_RESTORE_JTAG check
T Karthik Reddy (1):
mmc: zynq_sdhci: Add xilinx_pm_request weak function
arch/arm/dts/Makefile | 1 +
arch/arm/dts/zynqmp-dlc21-revA.dts | 221
++++++++++++++++++++++
arch/arm/dts/zynqmp-p-a2197-00-revA.dts | 2 +-
arch/arm/mach-zynqmp/Kconfig | 9 +
arch/arm/mach-zynqmp/include/mach/hardware.h | 31 +++-
board/xilinx/zynqmp/zynqmp-dlc21-revA/psu_init_gpl.c | 922
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
board/xilinx/zynqmp/zynqmp.c | 48 ++++-
configs/xilinx_zynqmp_virt_defconfig | 2 +-
drivers/firmware/firmware-zynqmp.c | 10 +-
drivers/mmc/zynq_sdhci.c | 6 +
drivers/net/zynq_gem.c | 2 +
drivers/spi/zynqmp_gqspi.c | 11 +-
12 files changed, 1243 insertions(+), 22 deletions(-)
create mode 100644 arch/arm/dts/zynqmp-dlc21-revA.dts
create mode 100644 board/xilinx/zynqmp/zynqmp-dlc21-revA/psu_init_gpl.c
