On 11/24/21 08:23, Ilias Apalodimas wrote:
Hi Heinrich,
On Mon, 15 Nov 2021 at 12:11, Heinrich Schuchardt
<heinrich.schucha...@canonical.com> wrote:
Provide a QEMU helper script to launch swtpm and add extra parameters to
conf.qemu_arm64_na and conf.qemu_arm_na to provide an emulated TPMv2.
Signed-off-by: Heinrich Schuchardt <heinrich.schucha...@canonical.com>
---
bin/qemu.swtpm | 19 +++++++++++++++++++
bin/travis-ci/conf.qemu_arm64_na | 3 ++-
bin/travis-ci/conf.qemu_arm_na | 3 ++-
3 files changed, 23 insertions(+), 2 deletions(-)
create mode 100755 bin/qemu.swtpm
diff --git a/bin/qemu.swtpm b/bin/qemu.swtpm
new file mode 100755
index 0000000..089feba
--- /dev/null
+++ b/bin/qemu.swtpm
@@ -0,0 +1,19 @@
+#!/bin/sh
+# SPDX-License-Identifier: BSD-2
+#
+# This script launches swtpm to emulate a TPMv2. The parameter -t makes it
+# unload when the connection to QEMU is terminated. To make use of it add
+#
+# qemu_helper_script="swtpm"
+#
+# to the board script and the following arguments to qemu_extra_args
+#
+# -chardev socket,id=chrtpm,path=/tmp/tpm/swtpm-sock \
+# -tpmdev emulator,id=tpm0,chardev=chrtpm \
+# -device tpm-tis-device,tpmdev=tpm0
+#
+# U-Boot must be built with CONFIG_TPM2_MMIO=y.
+
+mkdir -p /tmp/tpm
+swtpm socket -t --tpmstate dir=/tmp/tpm --tpm2 \
+--ctrl type=unixio,path=/tmp/tpm/swtpm-sock &
Nit pick the & can be '-d'
Daemonizing will ensure that we don't get console output. I will change
this.
diff --git a/bin/travis-ci/conf.qemu_arm64_na b/bin/travis-ci/conf.qemu_arm64_na
index e7c9426..14577d8 100644
--- a/bin/travis-ci/conf.qemu_arm64_na
+++ b/bin/travis-ci/conf.qemu_arm64_na
@@ -22,8 +22,9 @@
console_impl=qemu
qemu_machine="virt"
+qemu_helper_script="swtpm"
qemu_binary="qemu-system-aarch64"
-qemu_extra_args="-cpu cortex-a57 -nographic -netdev
user,id=net0,tftp=${UBOOT_TRAVIS_BUILD_DIR} -device e1000,netdev=net0 -device
virtio-rng-pci"
+qemu_extra_args="-cpu cortex-a57 -nographic -netdev
user,id=net0,tftp=${UBOOT_TRAVIS_BUILD_DIR} -device e1000,netdev=net0 -device
virtio-rng-pci -chardev socket,id=chrtpm,path=/tmp/tpm/swtpm-sock -tpmdev
emulator,id=tpm0,chardev=chrtpm -device tpm-tis-device,tpmdev=tpm0"
qemu_kernel_args="-bios ${U_BOOT_BUILD_DIR}/u-boot.bin"
reset_impl=none
flash_impl=none
diff --git a/bin/travis-ci/conf.qemu_arm_na b/bin/travis-ci/conf.qemu_arm_na
index 0f07c80..de0694d 100644
--- a/bin/travis-ci/conf.qemu_arm_na
+++ b/bin/travis-ci/conf.qemu_arm_na
@@ -22,8 +22,9 @@
console_impl=qemu
qemu_machine="virt"
+qemu_helper_script="swtpm"
qemu_binary="qemu-system-arm"
-qemu_extra_args="-nographic -netdev user,id=net0,tftp=${UBOOT_TRAVIS_BUILD_DIR}
-device e1000,netdev=net0 -device virtio-rng-pci"
+qemu_extra_args="-nographic -netdev user,id=net0,tftp=${UBOOT_TRAVIS_BUILD_DIR}
-device e1000,netdev=net0 -device virtio-rng-pci -chardev
socket,id=chrtpm,path=/tmp/tpm/swtpm-sock -tpmdev emulator,id=tpm0,chardev=chrtpm -device
tpm-tis-device,tpmdev=tpm0"
Just a note here 'tpm-tis-device' works for arm. If we evenr need
this on x86 it's 'tpm-tis' ....
This file is ARM specific.
Best regards
Heinrich
qemu_kernel_args="-bios ${U_BOOT_BUILD_DIR}/u-boot.bin"
reset_impl=none
flash_impl=none
--
2.32.0
Other than that
Reviewed-by: Ilias Apalodimas <ilias.apalodi...@linaro.org>
