Re: [PATCH u-boot-marvell v2 9/9] arm: mvebu: spl: Fix 100 column exceeds

[Stefan Roese]

On 11/26/21 15:37, Marek Behún wrote:

From: Marek Behún <marek.be...@nic.cz>

Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.

Signed-off-by: Marek Behún <marek.be...@nic.cz>

Reviewed-by: Stefan Roese <s...@denx.de>

Thanks,
Stefan

---
  arch/arm/mach-mvebu/spl.c | 6 ++++--
  1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 7dbe8eeba3..7450e1e3da 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -47,7 +47,8 @@
  #if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) && 
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR != 0
  #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR must be set to 0
  #endif
-#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && 
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
+#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && \
+    CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
  #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET must be set to 0
  #endif
  #endif
@@ -58,7 +59,8 @@
   * set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
   */
  #ifdef CONFIG_SPL_SATA
-#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || 
!defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || 
CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
+#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || \
+    !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || 
CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
  #error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
  #endif
  #endif

Viele Grüße,
Stefan Roese

--
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: s...@denx.de