On 12/1/21 00:10, Daniel Cizinsky wrote:
On Tue, Nov 30, 2021 at 08:28:51AM +0100, Michal Simek wrote:
I did try latest yesterday and didn't see any issue.
Hi!
Thank you very much to both of you for letting me know!
How do you build u-boot?
I use Buildroot with some simple scripts (just to make sure we begin with a
clean table and known .configs).
And what board version do you have?
It says on PCB:
HW-Z1-ZCU102
Revision 1.1
Older U-Boot, which gets past MMC says: ATF running on XCZU9EG/silicon
v4/RTL5.1
I guess it's pretty common one, the only difference to original set is DDR
as we like to have all the boards exactly the same (and some set came with
one kind of RAM and other with another, so we decided to have the third kind,
but the same for all boards in our company).
I'll try to attach the config file of U-Boot I build. If attaching files is
not possible, it's available at: http://gebbeth.cz/pub/xilinx/u-boot.config
Thanks for any comment!
buildroot config is quite different compare to one which is in the tree.
I don't think anybody really keeps that configs there up2date. And there
is really no reason not to build it in direct way.
Just follow documentation present doc/board/xilinx/zynqmp.rst
and in your case run
export DEVICE_TREE=zynqmp-zcu102-rev1.1
Thanks,
Michal
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs
