On Mon, 6 Dec 2021 17:11:46 -0700 Simon Glass <[email protected]> wrote:
Hi, > Sync these file, obtained from Linux v5.15. So just for the records: Here you have the same problem as with the other platforms: There are three different revisions of the board, all out in the wild and heavily used. The platform firmware (some STM32 controller on the board) sorts out which board you have, and places the right DTB in the NOR flash. So by reading that from there, you get the correct information. So as it stands right now, having the Juno DTBs in the tree does not help in any way, as they are not packaged. Actually just u-boot.bin is becoming part of the TF-A FIP image, and then this fip.bin is copied to the board's SD card, along with all three DTBs. I can write up some instructions on how to deploy the firmware on the board, if that helps. If you want to tweak the DTB, for experimentation or testing, just copy something to the SD card, from where it gets automatically copied to the NOR flash on board bootup. So I would rather just avoid the duplicated .dts copies in the U-Boot tree, given that they won't be used in any way. Cheers, Andre > Add a note for the maintainer, and SPDX lines where they are missing. > The added lines are: > > SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause > > Note, this matches the text in those files, but is not the same as the > GPL-2.0 of some files. > > [1] https://releases.linaro.org/android/reference-lcr/juno/7.1-17.05/ > > Signed-off-by: Simon Glass <[email protected]> > --- > > Changes in v7: > - Bring in files from Linux instead > - Rewrite the commit message > > arch/arm/dts/Makefile | 3 + > arch/arm/dts/juno-base.dtsi | 831 +++++++++++++++++++++++++ > arch/arm/dts/juno-clocks.dtsi | 46 ++ > arch/arm/dts/juno-cs-r1r2.dtsi | 85 +++ > arch/arm/dts/juno-motherboard.dtsi | 303 +++++++++ > arch/arm/dts/juno-r2.dts | 322 ++++++++++ > configs/vexpress_aemv8a_juno_defconfig | 1 + > 7 files changed, 1591 insertions(+) > create mode 100644 arch/arm/dts/juno-base.dtsi > create mode 100644 arch/arm/dts/juno-clocks.dtsi > create mode 100644 arch/arm/dts/juno-cs-r1r2.dtsi > create mode 100644 arch/arm/dts/juno-motherboard.dtsi > create mode 100644 arch/arm/dts/juno-r2.dts > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 9cddab37207..d53bae2c350 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -1149,7 +1149,10 @@ dtb-$(CONFIG_TARGET_GE_BX50V3) += \ > dtb-$(CONFIG_TARGET_GE_B1X5V2) += imx6dl-b1x5v2.dtb > dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb > > +# TODO(Linus Walleij <[email protected]>): Should us a single vexpress > +# Kconfig option to build all of these. See examples above. > dtb-$(CONFIG_TARGET_VEXPRESS_CA9X4) += vexpress-v2p-ca9.dtb > +dtb-$(CONFIG_TARGET_VEXPRESS64_JUNO) += juno-r2.dtb > > dtb-$(CONFIG_TARGET_TOTAL_COMPUTE) += total_compute.dtb > > diff --git a/arch/arm/dts/juno-base.dtsi b/arch/arm/dts/juno-base.dtsi > new file mode 100644 > index 00000000000..6288e104a08 > --- /dev/null > +++ b/arch/arm/dts/juno-base.dtsi > @@ -0,0 +1,831 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include "juno-clocks.dtsi" > +#include "juno-motherboard.dtsi" > + > +/ { > + /* > + * Devices shared by all Juno boards > + */ > + > + memtimer: timer@2a810000 { > + compatible = "arm,armv7-timer-mem"; > + reg = <0x0 0x2a810000 0x0 0x10000>; > + clock-frequency = <50000000>; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0x0 0x2a820000 0x20000>; > + status = "disabled"; > + frame@2a830000 { > + frame-number = <1>; > + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; > + reg = <0x10000 0x10000>; > + }; > + }; > + > + mailbox: mhu@2b1f0000 { > + compatible = "arm,mhu", "arm,primecell"; > + reg = <0x0 0x2b1f0000 0x0 0x1000>; > + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; > + #mbox-cells = <1>; > + clocks = <&soc_refclk100mhz>; > + clock-names = "apb_pclk"; > + }; > + > + smmu_gpu: iommu@2b400000 { > + compatible = "arm,mmu-400", "arm,smmu-v1"; > + reg = <0x0 0x2b400000 0x0 0x10000>; > + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; > + #iommu-cells = <1>; > + #global-interrupts = <1>; > + power-domains = <&scpi_devpd 1>; > + dma-coherent; > + status = "disabled"; > + }; > + > + smmu_pcie: iommu@2b500000 { > + compatible = "arm,mmu-401", "arm,smmu-v1"; > + reg = <0x0 0x2b500000 0x0 0x10000>; > + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; > + #iommu-cells = <1>; > + #global-interrupts = <1>; > + dma-coherent; > + status = "disabled"; > + }; > + > + smmu_etr: iommu@2b600000 { > + compatible = "arm,mmu-401", "arm,smmu-v1"; > + reg = <0x0 0x2b600000 0x0 0x10000>; > + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + #iommu-cells = <1>; > + #global-interrupts = <1>; > + dma-coherent; > + power-domains = <&scpi_devpd 0>; > + }; > + > + gic: interrupt-controller@2c010000 { > + compatible = "arm,gic-400", "arm,cortex-a15-gic"; > + reg = <0x0 0x2c010000 0 0x1000>, > + <0x0 0x2c02f000 0 0x2000>, > + <0x0 0x2c04f000 0 0x2000>, > + <0x0 0x2c06f000 0 0x2000>; > + #address-cells = <1>; > + #interrupt-cells = <3>; > + #size-cells = <1>; > + interrupt-controller; > + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_HIGH)>; > + ranges = <0 0 0x2c1c0000 0x40000>; > + > + v2m_0: v2m@0 { > + compatible = "arm,gic-v2m-frame"; > + msi-controller; > + reg = <0 0x10000>; > + }; > + > + v2m@10000 { > + compatible = "arm,gic-v2m-frame"; > + msi-controller; > + reg = <0x10000 0x10000>; > + }; > + > + v2m@20000 { > + compatible = "arm,gic-v2m-frame"; > + msi-controller; > + reg = <0x20000 0x10000>; > + }; > + > + v2m@30000 { > + compatible = "arm,gic-v2m-frame"; > + msi-controller; > + reg = <0x30000 0x10000>; > + }; > + }; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>, > + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | > IRQ_TYPE_LEVEL_LOW)>; > + }; > + > + /* > + * Juno TRMs specify the size for these coresight components as 64K. > + * The actual size is just 4K though 64K is reserved. Access to the > + * unmapped reserved region results in a DECERR response. > + */ > + etf@20010000 { /* etf0 */ > + compatible = "arm,coresight-tmc", "arm,primecell"; > + reg = <0 0x20010000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + > + in-ports { > + port { > + etf0_in_port: endpoint { > + remote-endpoint = > <&main_funnel_out_port>; > + }; > + }; > + }; > + > + out-ports { > + port { > + etf0_out_port: endpoint { > + }; > + }; > + }; > + }; > + > + tpiu@20030000 { > + compatible = "arm,coresight-tpiu", "arm,primecell"; > + reg = <0 0x20030000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + in-ports { > + port { > + tpiu_in_port: endpoint { > + remote-endpoint = > <&replicator_out_port0>; > + }; > + }; > + }; > + }; > + > + /* main funnel on Juno r0, cssys0 funnel on Juno r1/r2 as per TRM*/ > + main_funnel: funnel@20040000 { > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x20040000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + > + out-ports { > + port { > + main_funnel_out_port: endpoint { > + remote-endpoint = <&etf0_in_port>; > + }; > + }; > + }; > + > + main_funnel_in_ports: in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + main_funnel_in_port0: endpoint { > + remote-endpoint = > <&cluster0_funnel_out_port>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + main_funnel_in_port1: endpoint { > + remote-endpoint = > <&cluster1_funnel_out_port>; > + }; > + }; > + }; > + }; > + > + etr@20070000 { > + compatible = "arm,coresight-tmc", "arm,primecell"; > + reg = <0 0x20070000 0 0x1000>; > + iommus = <&smmu_etr 0>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + arm,scatter-gather; > + in-ports { > + port { > + etr_in_port: endpoint { > + remote-endpoint = > <&replicator_out_port1>; > + }; > + }; > + }; > + }; > + > + stm@20100000 { > + compatible = "arm,coresight-stm", "arm,primecell"; > + reg = <0 0x20100000 0 0x1000>, > + <0 0x28000000 0 0x1000000>; > + reg-names = "stm-base", "stm-stimulus-base"; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + stm_out_port: endpoint { > + }; > + }; > + }; > + }; > + > + replicator@20120000 { > + compatible = "arm,coresight-dynamic-replicator", > "arm,primecell"; > + reg = <0 0x20120000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + > + out-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + /* replicator output ports */ > + port@0 { > + reg = <0>; > + replicator_out_port0: endpoint { > + remote-endpoint = <&tpiu_in_port>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + replicator_out_port1: endpoint { > + remote-endpoint = <&etr_in_port>; > + }; > + }; > + }; > + in-ports { > + port { > + replicator_in_port0: endpoint { > + }; > + }; > + }; > + }; > + > + cpu_debug0: cpu-debug@22010000 { > + compatible = "arm,coresight-cpu-debug", "arm,primecell"; > + reg = <0x0 0x22010000 0x0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + }; > + > + etm0: etm@22040000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x22040000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster0_etm0_out_port: endpoint { > + remote-endpoint = > <&cluster0_funnel_in_port0>; > + }; > + }; > + }; > + }; > + > + funnel@220c0000 { /* cluster0 funnel */ > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x220c0000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster0_funnel_out_port: endpoint { > + remote-endpoint = > <&main_funnel_in_port0>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + cluster0_funnel_in_port0: endpoint { > + remote-endpoint = > <&cluster0_etm0_out_port>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + cluster0_funnel_in_port1: endpoint { > + remote-endpoint = > <&cluster0_etm1_out_port>; > + }; > + }; > + }; > + }; > + > + cpu_debug1: cpu-debug@22110000 { > + compatible = "arm,coresight-cpu-debug", "arm,primecell"; > + reg = <0x0 0x22110000 0x0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + }; > + > + etm1: etm@22140000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x22140000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster0_etm1_out_port: endpoint { > + remote-endpoint = > <&cluster0_funnel_in_port1>; > + }; > + }; > + }; > + }; > + > + cpu_debug2: cpu-debug@23010000 { > + compatible = "arm,coresight-cpu-debug", "arm,primecell"; > + reg = <0x0 0x23010000 0x0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + }; > + > + etm2: etm@23040000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x23040000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster1_etm0_out_port: endpoint { > + remote-endpoint = > <&cluster1_funnel_in_port0>; > + }; > + }; > + }; > + }; > + > + funnel@230c0000 { /* cluster1 funnel */ > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x230c0000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster1_funnel_out_port: endpoint { > + remote-endpoint = > <&main_funnel_in_port1>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + cluster1_funnel_in_port0: endpoint { > + remote-endpoint = > <&cluster1_etm0_out_port>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + cluster1_funnel_in_port1: endpoint { > + remote-endpoint = > <&cluster1_etm1_out_port>; > + }; > + }; > + port@2 { > + reg = <2>; > + cluster1_funnel_in_port2: endpoint { > + remote-endpoint = > <&cluster1_etm2_out_port>; > + }; > + }; > + port@3 { > + reg = <3>; > + cluster1_funnel_in_port3: endpoint { > + remote-endpoint = > <&cluster1_etm3_out_port>; > + }; > + }; > + }; > + }; > + > + cpu_debug3: cpu-debug@23110000 { > + compatible = "arm,coresight-cpu-debug", "arm,primecell"; > + reg = <0x0 0x23110000 0x0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + }; > + > + etm3: etm@23140000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x23140000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster1_etm1_out_port: endpoint { > + remote-endpoint = > <&cluster1_funnel_in_port1>; > + }; > + }; > + }; > + }; > + > + cpu_debug4: cpu-debug@23210000 { > + compatible = "arm,coresight-cpu-debug", "arm,primecell"; > + reg = <0x0 0x23210000 0x0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + }; > + > + etm4: etm@23240000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x23240000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster1_etm2_out_port: endpoint { > + remote-endpoint = > <&cluster1_funnel_in_port2>; > + }; > + }; > + }; > + }; > + > + cpu_debug5: cpu-debug@23310000 { > + compatible = "arm,coresight-cpu-debug", "arm,primecell"; > + reg = <0x0 0x23310000 0x0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + }; > + > + etm5: etm@23340000 { > + compatible = "arm,coresight-etm4x", "arm,primecell"; > + reg = <0 0x23340000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + cluster1_etm3_out_port: endpoint { > + remote-endpoint = > <&cluster1_funnel_in_port3>; > + }; > + }; > + }; > + }; > + > + gpu: gpu@2d000000 { > + compatible = "arm,juno-mali", "arm,mali-t624"; > + reg = <0 0x2d000000 0 0x10000>; > + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "job", "mmu", "gpu"; > + clocks = <&scpi_dvfs 2>; > + power-domains = <&scpi_devpd 1>; > + dma-coherent; > + /* The SMMU is only really of interest to bare-metal > hypervisors */ > + /* iommus = <&smmu_gpu 0>; */ > + status = "disabled"; > + }; > + > + sram: sram@2e000000 { > + compatible = "arm,juno-sram-ns", "mmio-sram"; > + reg = <0x0 0x2e000000 0x0 0x8000>; > + > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0x0 0x2e000000 0x8000>; > + > + cpu_scp_lpri: scp-sram@0 { > + compatible = "arm,juno-scp-shmem"; > + reg = <0x0 0x200>; > + }; > + > + cpu_scp_hpri: scp-sram@200 { > + compatible = "arm,juno-scp-shmem"; > + reg = <0x200 0x200>; > + }; > + }; > + > + pcie_ctlr: pcie@40000000 { > + compatible = "arm,juno-r1-pcie", "plda,xpressrich3-axi", > "pci-host-ecam-generic"; > + device_type = "pci"; > + reg = <0 0x40000000 0 0x10000000>; /* ECAM config space */ > + bus-range = <0 255>; > + linux,pci-domain = <0>; > + #address-cells = <3>; > + #size-cells = <2>; > + dma-coherent; > + ranges = <0x01000000 0x00 0x00000000 0x00 0x5f800000 0x0 > 0x00800000>, > + <0x02000000 0x00 0x50000000 0x00 0x50000000 0x0 > 0x08000000>, > + <0x42000000 0x40 0x00000000 0x40 0x00000000 0x1 > 0x00000000>; > + /* Standard AXI Translation entries as programmed by EDK2 */ > + dma-ranges = <0x02000000 0x0 0x2c1c0000 0x0 0x2c1c0000 0x0 > 0x00040000>, > + <0x02000000 0x0 0x80000000 0x0 0x80000000 0x0 > 0x80000000>, > + <0x43000000 0x8 0x00000000 0x8 0x00000000 0x2 > 0x00000000>; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0 0 0 1 &gic 0 GIC_SPI 136 > IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 2 &gic 0 GIC_SPI 137 > IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 3 &gic 0 GIC_SPI 138 > IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 4 &gic 0 GIC_SPI 139 > IRQ_TYPE_LEVEL_HIGH>; > + msi-parent = <&v2m_0>; > + status = "disabled"; > + iommu-map-mask = <0x0>; /* RC has no means to output PCI RID */ > + iommu-map = <0x0 &smmu_pcie 0x0 0x1>; > + }; > + > + scpi { > + compatible = "arm,scpi"; > + mboxes = <&mailbox 1>; > + shmem = <&cpu_scp_hpri>; > + > + clocks { > + compatible = "arm,scpi-clocks"; > + > + scpi_dvfs: clocks-0 { > + compatible = "arm,scpi-dvfs-clocks"; > + #clock-cells = <1>; > + clock-indices = <0>, <1>, <2>; > + clock-output-names = "atlclk", > "aplclk","gpuclk"; > + }; > + scpi_clk: clocks-1 { > + compatible = "arm,scpi-variable-clocks"; > + #clock-cells = <1>; > + clock-indices = <3>; > + clock-output-names = "pxlclk"; > + }; > + }; > + > + scpi_devpd: power-controller { > + compatible = "arm,scpi-power-domains"; > + num-domains = <2>; > + #power-domain-cells = <1>; > + }; > + > + scpi_sensors0: sensors { > + compatible = "arm,scpi-sensors"; > + #thermal-sensor-cells = <1>; > + }; > + }; > + > + thermal-zones { > + pmic { > + polling-delay = <1000>; > + polling-delay-passive = <100>; > + thermal-sensors = <&scpi_sensors0 0>; > + }; > + > + soc { > + polling-delay = <1000>; > + polling-delay-passive = <100>; > + thermal-sensors = <&scpi_sensors0 3>; > + }; > + > + big_cluster_thermal_zone: big-cluster { > + polling-delay = <1000>; > + polling-delay-passive = <100>; > + thermal-sensors = <&scpi_sensors0 21>; > + status = "disabled"; > + }; > + > + little_cluster_thermal_zone: little-cluster { > + polling-delay = <1000>; > + polling-delay-passive = <100>; > + thermal-sensors = <&scpi_sensors0 22>; > + status = "disabled"; > + }; > + > + gpu0_thermal_zone: gpu0 { > + polling-delay = <1000>; > + polling-delay-passive = <100>; > + thermal-sensors = <&scpi_sensors0 23>; > + status = "disabled"; > + }; > + > + gpu1_thermal_zone: gpu1 { > + polling-delay = <1000>; > + polling-delay-passive = <100>; > + thermal-sensors = <&scpi_sensors0 24>; > + status = "disabled"; > + }; > + }; > + > + smmu_dma: iommu@7fb00000 { > + compatible = "arm,mmu-401", "arm,smmu-v1"; > + reg = <0x0 0x7fb00000 0x0 0x10000>; > + interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>; > + #iommu-cells = <1>; > + #global-interrupts = <1>; > + dma-coherent; > + }; > + > + smmu_hdlcd1: iommu@7fb10000 { > + compatible = "arm,mmu-401", "arm,smmu-v1"; > + reg = <0x0 0x7fb10000 0x0 0x10000>; > + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; > + #iommu-cells = <1>; > + #global-interrupts = <1>; > + }; > + > + smmu_hdlcd0: iommu@7fb20000 { > + compatible = "arm,mmu-401", "arm,smmu-v1"; > + reg = <0x0 0x7fb20000 0x0 0x10000>; > + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; > + #iommu-cells = <1>; > + #global-interrupts = <1>; > + }; > + > + smmu_usb: iommu@7fb30000 { > + compatible = "arm,mmu-401", "arm,smmu-v1"; > + reg = <0x0 0x7fb30000 0x0 0x10000>; > + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; > + #iommu-cells = <1>; > + #global-interrupts = <1>; > + dma-coherent; > + }; > + > + dma@7ff00000 { > + compatible = "arm,pl330", "arm,primecell"; > + reg = <0x0 0x7ff00000 0 0x1000>; > + #dma-cells = <1>; > + #dma-channels = <8>; > + #dma-requests = <32>; > + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&smmu_dma 0>, > + <&smmu_dma 1>, > + <&smmu_dma 2>, > + <&smmu_dma 3>, > + <&smmu_dma 4>, > + <&smmu_dma 5>, > + <&smmu_dma 6>, > + <&smmu_dma 7>, > + <&smmu_dma 8>; > + clocks = <&soc_faxiclk>; > + clock-names = "apb_pclk"; > + }; > + > + hdlcd@7ff50000 { > + compatible = "arm,hdlcd"; > + reg = <0 0x7ff50000 0 0x1000>; > + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&smmu_hdlcd1 0>; > + clocks = <&scpi_clk 3>; > + clock-names = "pxlclk"; > + > + port { > + hdlcd1_output: endpoint { > + remote-endpoint = <&tda998x_1_input>; > + }; > + }; > + }; > + > + hdlcd@7ff60000 { > + compatible = "arm,hdlcd"; > + reg = <0 0x7ff60000 0 0x1000>; > + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&smmu_hdlcd0 0>; > + clocks = <&scpi_clk 3>; > + clock-names = "pxlclk"; > + > + port { > + hdlcd0_output: endpoint { > + remote-endpoint = <&tda998x_0_input>; > + }; > + }; > + }; > + > + soc_uart0: serial@7ff80000 { > + compatible = "arm,pl011", "arm,primecell"; > + reg = <0x0 0x7ff80000 0x0 0x1000>; > + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&soc_uartclk>, <&soc_refclk100mhz>; > + clock-names = "uartclk", "apb_pclk"; > + }; > + > + i2c@7ffa0000 { > + compatible = "snps,designware-i2c"; > + reg = <0x0 0x7ffa0000 0x0 0x1000>; > + #address-cells = <1>; > + #size-cells = <0>; > + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>; > + clock-frequency = <400000>; > + i2c-sda-hold-time-ns = <500>; > + clocks = <&soc_smc50mhz>; > + > + hdmi-transmitter@70 { > + compatible = "nxp,tda998x"; > + reg = <0x70>; > + port { > + tda998x_0_input: endpoint { > + remote-endpoint = <&hdlcd0_output>; > + }; > + }; > + }; > + > + hdmi-transmitter@71 { > + compatible = "nxp,tda998x"; > + reg = <0x71>; > + port { > + tda998x_1_input: endpoint { > + remote-endpoint = <&hdlcd1_output>; > + }; > + }; > + }; > + }; > + > + usb@7ffb0000 { > + compatible = "generic-ohci"; > + reg = <0x0 0x7ffb0000 0x0 0x10000>; > + interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&smmu_usb 0>; > + clocks = <&soc_usb48mhz>; > + }; > + > + usb@7ffc0000 { > + compatible = "generic-ehci"; > + reg = <0x0 0x7ffc0000 0x0 0x10000>; > + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>; > + iommus = <&smmu_usb 0>; > + clocks = <&soc_usb48mhz>; > + }; > + > + memory-controller@7ffd0000 { > + compatible = "arm,pl354", "arm,primecell"; > + reg = <0 0x7ffd0000 0 0x1000>; > + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + }; > + > + memory@80000000 { > + device_type = "memory"; > + /* last 16MB of the first memory area is reserved for secure > world use by firmware */ > + reg = <0x00000000 0x80000000 0x0 0x7f000000>, > + <0x00000008 0x80000000 0x1 0x80000000>; > + }; > + > + bus@8000000 { > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 15>; > + interrupt-map = <0 0 0 &gic 0 GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 1 &gic 0 GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 2 &gic 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 3 &gic 0 GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 4 &gic 0 GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 5 &gic 0 GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 6 &gic 0 GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 7 &gic 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 8 &gic 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 9 &gic 0 GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 10 &gic 0 GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 11 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 12 &gic 0 GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; > + }; > + > + site2: tlx-bus@60000000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 0 0x60000000 0x10000000>; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0>; > + interrupt-map = <0 0 &gic 0 GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; > + }; > +}; > diff --git a/arch/arm/dts/juno-clocks.dtsi b/arch/arm/dts/juno-clocks.dtsi > new file mode 100644 > index 00000000000..b0f8ccaac9e > --- /dev/null > +++ b/arch/arm/dts/juno-clocks.dtsi > @@ -0,0 +1,46 @@ > +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause > +/* > + * ARM Juno Platform clocks > + * > + * Copyright (c) 2013-2014 ARM Ltd > + * > + * This file is licensed under a dual GPLv2 or BSD license. > + * > + */ > +/ { > + /* SoC fixed clocks */ > + soc_uartclk: refclk7372800hz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <7372800>; > + clock-output-names = "juno:uartclk"; > + }; > + > + soc_usb48mhz: clk48mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <48000000>; > + clock-output-names = "clk48mhz"; > + }; > + > + soc_smc50mhz: clk50mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <50000000>; > + clock-output-names = "smc_clk"; > + }; > + > + soc_refclk100mhz: refclk100mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <100000000>; > + clock-output-names = "apb_pclk"; > + }; > + > + soc_faxiclk: refclk400mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <400000000>; > + clock-output-names = "faxi_clk"; > + }; > +}; > diff --git a/arch/arm/dts/juno-cs-r1r2.dtsi b/arch/arm/dts/juno-cs-r1r2.dtsi > new file mode 100644 > index 00000000000..eda3d9e18af > --- /dev/null > +++ b/arch/arm/dts/juno-cs-r1r2.dtsi > @@ -0,0 +1,85 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/ { > + funnel@20130000 { /* cssys1 */ > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x20130000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + csys1_funnel_out_port: endpoint { > + remote-endpoint = <&etf1_in_port>; > + }; > + }; > + }; > + in-ports { > + port { > + csys1_funnel_in_port0: endpoint { > + }; > + }; > + > + }; > + }; > + > + etf@20140000 { /* etf1 */ > + compatible = "arm,coresight-tmc", "arm,primecell"; > + reg = <0 0x20140000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + in-ports { > + port { > + etf1_in_port: endpoint { > + remote-endpoint = > <&csys1_funnel_out_port>; > + }; > + }; > + }; > + out-ports { > + port { > + etf1_out_port: endpoint { > + remote-endpoint = > <&csys2_funnel_in_port1>; > + }; > + }; > + }; > + }; > + > + funnel@20150000 { /* cssys2 */ > + compatible = "arm,coresight-dynamic-funnel", "arm,primecell"; > + reg = <0 0x20150000 0 0x1000>; > + > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + power-domains = <&scpi_devpd 0>; > + out-ports { > + port { > + csys2_funnel_out_port: endpoint { > + remote-endpoint = > <&replicator_in_port0>; > + }; > + }; > + }; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + csys2_funnel_in_port0: endpoint { > + slave-mode; > + remote-endpoint = <&etf0_out_port>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + csys2_funnel_in_port1: endpoint { > + slave-mode; > + remote-endpoint = <&etf1_out_port>; > + }; > + }; > + > + }; > + }; > +}; > diff --git a/arch/arm/dts/juno-motherboard.dtsi > b/arch/arm/dts/juno-motherboard.dtsi > new file mode 100644 > index 00000000000..42b17542ab1 > --- /dev/null > +++ b/arch/arm/dts/juno-motherboard.dtsi > @@ -0,0 +1,303 @@ > +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause > +/* > + * ARM Juno Platform motherboard peripherals > + * > + * Copyright (c) 2013-2014 ARM Ltd > + * > + * This file is licensed under a dual GPLv2 or BSD license. > + * > + */ > + > +/ { > + mb_clk24mhz: clk24mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > + clock-output-names = "juno_mb:clk24mhz"; > + }; > + > + mb_clk25mhz: clk25mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; > + clock-output-names = "juno_mb:clk25mhz"; > + }; > + > + v2m_refclk1mhz: refclk1mhz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1000000>; > + clock-output-names = "juno_mb:refclk1mhz"; > + }; > + > + v2m_refclk32khz: refclk32khz { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + clock-output-names = "juno_mb:refclk32khz"; > + }; > + > + mb_fixed_3v3: mcc-sb-3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "MCC_SB_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + > + power-button { > + debounce-interval = <50>; > + wakeup-source; > + linux,code = <116>; > + label = "POWER"; > + gpios = <&iofpga_gpio0 0 0x4>; > + }; > + home-button { > + debounce-interval = <50>; > + wakeup-source; > + linux,code = <102>; > + label = "HOME"; > + gpios = <&iofpga_gpio0 1 0x4>; > + }; > + rlock-button { > + debounce-interval = <50>; > + wakeup-source; > + linux,code = <152>; > + label = "RLOCK"; > + gpios = <&iofpga_gpio0 2 0x4>; > + }; > + vol-up-button { > + debounce-interval = <50>; > + wakeup-source; > + linux,code = <115>; > + label = "VOL+"; > + gpios = <&iofpga_gpio0 3 0x4>; > + }; > + vol-down-button { > + debounce-interval = <50>; > + wakeup-source; > + linux,code = <114>; > + label = "VOL-"; > + gpios = <&iofpga_gpio0 4 0x4>; > + }; > + nmi-button { > + debounce-interval = <50>; > + wakeup-source; > + linux,code = <99>; > + label = "NMI"; > + gpios = <&iofpga_gpio0 5 0x4>; > + }; > + }; > + > + bus@8000000 { > + compatible = "simple-bus"; > + #address-cells = <2>; > + #size-cells = <1>; > + ranges = <0 0x8000000 0 0x8000000 0x18000000>; > + > + motherboard-bus@8000000 { > + compatible = "arm,vexpress,v2p-p1", "simple-bus"; > + #address-cells = <2>; /* SMB chipselect number and > offset */ > + #size-cells = <1>; > + ranges = <0 0 0 0x08000000 0x04000000>, > + <1 0 0 0x14000000 0x04000000>, > + <2 0 0 0x18000000 0x04000000>, > + <3 0 0 0x1c000000 0x04000000>, > + <4 0 0 0x0c000000 0x04000000>, > + <5 0 0 0x10000000 0x04000000>; > + arm,hbi = <0x252>; > + arm,vexpress,site = <0>; > + > + flash@0 { > + /* 2 * 32MiB NOR Flash memory mounted on CS0 */ > + compatible = "arm,vexpress-flash", "cfi-flash"; > + reg = <0 0x00000000 0x04000000>; > + bank-width = <4>; > + /* > + * Unfortunately, accessing the flash disturbs > + * the CPU idle states (suspend) and CPU > + * hotplug of the platform. For this reason, > + * flash hardware access is disabled by default. > + */ > + status = "disabled"; > + partitions { > + compatible = "arm,arm-firmware-suite"; > + }; > + }; > + > + ethernet@200000000 { > + compatible = "smsc,lan9118", "smsc,lan9115"; > + reg = <2 0x00000000 0x10000>; > + interrupts = <3>; > + phy-mode = "mii"; > + reg-io-width = <4>; > + smsc,irq-active-high; > + smsc,irq-push-pull; > + clocks = <&mb_clk25mhz>; > + vdd33a-supply = <&mb_fixed_3v3>; > + vddvario-supply = <&mb_fixed_3v3>; > + }; > + > + iofpga-bus@300000000 { > + compatible = "simple-bus"; > + #address-cells = <1>; > + #size-cells = <1>; > + ranges = <0 3 0 0x200000>; > + > + v2m_sysctl: sysctl@20000 { > + compatible = "arm,sp810", > "arm,primecell"; > + reg = <0x020000 0x1000>; > + clocks = <&v2m_refclk32khz>, > <&v2m_refclk1mhz>, <&mb_clk24mhz>; > + clock-names = "refclk", "timclk", > "apb_pclk"; > + #clock-cells = <1>; > + clock-output-names = "timerclken0", > "timerclken1", "timerclken2", "timerclken3"; > + assigned-clocks = <&v2m_sysctl 0>, > <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>; > + assigned-clock-parents = > <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>; > + }; > + > + apbregs@10000 { > + compatible = "syscon", "simple-mfd"; > + reg = <0x010000 0x1000>; > + > + led0 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x01>; > + label = "vexpress:0"; > + linux,default-trigger = > "heartbeat"; > + default-state = "on"; > + }; > + led1 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x02>; > + label = "vexpress:1"; > + linux,default-trigger = "mmc0"; > + default-state = "off"; > + }; > + led2 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x04>; > + label = "vexpress:2"; > + linux,default-trigger = "cpu0"; > + default-state = "off"; > + }; > + led3 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x08>; > + label = "vexpress:3"; > + linux,default-trigger = "cpu1"; > + default-state = "off"; > + }; > + led4 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x10>; > + label = "vexpress:4"; > + linux,default-trigger = "cpu2"; > + default-state = "off"; > + }; > + led5 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x20>; > + label = "vexpress:5"; > + linux,default-trigger = "cpu3"; > + default-state = "off"; > + }; > + led6 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x40>; > + label = "vexpress:6"; > + default-state = "off"; > + }; > + led7 { > + compatible = "register-bit-led"; > + offset = <0x08>; > + mask = <0x80>; > + label = "vexpress:7"; > + default-state = "off"; > + }; > + }; > + > + mmc@50000 { > + compatible = "arm,pl180", > "arm,primecell"; > + reg = <0x050000 0x1000>; > + interrupts = <5>; > + /* cd-gpios = <&v2m_mmc_gpios 0 0>; > + wp-gpios = <&v2m_mmc_gpios 1 0>; */ > + max-frequency = <12000000>; > + vmmc-supply = <&mb_fixed_3v3>; > + clocks = <&mb_clk24mhz>, > <&soc_smc50mhz>; > + clock-names = "mclk", "apb_pclk"; > + }; > + > + kmi@60000 { > + compatible = "arm,pl050", > "arm,primecell"; > + reg = <0x060000 0x1000>; > + interrupts = <8>; > + clocks = <&mb_clk24mhz>, > <&soc_smc50mhz>; > + clock-names = "KMIREFCLK", "apb_pclk"; > + }; > + > + kmi@70000 { > + compatible = "arm,pl050", > "arm,primecell"; > + reg = <0x070000 0x1000>; > + interrupts = <8>; > + clocks = <&mb_clk24mhz>, > <&soc_smc50mhz>; > + clock-names = "KMIREFCLK", "apb_pclk"; > + }; > + > + watchdog@f0000 { > + compatible = "arm,sp805", > "arm,primecell"; > + reg = <0x0f0000 0x10000>; > + interrupts = <7>; > + clocks = <&mb_clk24mhz>, > <&soc_smc50mhz>; > + clock-names = "wdog_clk", "apb_pclk"; > + }; > + > + v2m_timer01: timer@110000 { > + compatible = "arm,sp804", > "arm,primecell"; > + reg = <0x110000 0x10000>; > + interrupts = <9>; > + clocks = <&v2m_sysctl 0>, <&v2m_sysctl > 1>, <&mb_clk24mhz>; > + clock-names = "timclken1", "timclken2", > "apb_pclk"; > + }; > + > + v2m_timer23: timer@120000 { > + compatible = "arm,sp804", > "arm,primecell"; > + reg = <0x120000 0x10000>; > + interrupts = <9>; > + clocks = <&v2m_sysctl 2>, <&v2m_sysctl > 3>, <&mb_clk24mhz>; > + clock-names = "timclken1", "timclken2", > "apb_pclk"; > + }; > + > + rtc@170000 { > + compatible = "arm,pl031", > "arm,primecell"; > + reg = <0x170000 0x10000>; > + interrupts = <0>; > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + }; > + > + iofpga_gpio0: gpio@1d0000 { > + compatible = "arm,pl061", > "arm,primecell"; > + reg = <0x1d0000 0x1000>; > + interrupts = <6>; > + clocks = <&soc_smc50mhz>; > + clock-names = "apb_pclk"; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > + }; > + }; > + }; > +}; > diff --git a/arch/arm/dts/juno-r2.dts b/arch/arm/dts/juno-r2.dts > new file mode 100644 > index 00000000000..52a6517d165 > --- /dev/null > +++ b/arch/arm/dts/juno-r2.dts > @@ -0,0 +1,322 @@ > +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause > +/* > + * ARM Ltd. Juno Platform > + * > + * Copyright (c) 2015 ARM Ltd. > + * > + * This file is licensed under a dual GPLv2 or BSD license. > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include "juno-base.dtsi" > +#include "juno-cs-r1r2.dtsi" > + > +/ { > + model = "ARM Juno development board (r2)"; > + compatible = "arm,juno-r2", "arm,juno", "arm,vexpress"; > + interrupt-parent = <&gic>; > + #address-cells = <2>; > + #size-cells = <2>; > + > + aliases { > + serial0 = &soc_uart0; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + psci { > + compatible = "arm,psci-0.2"; > + method = "smc"; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&A72_0>; > + }; > + core1 { > + cpu = <&A72_1>; > + }; > + }; > + > + cluster1 { > + core0 { > + cpu = <&A53_0>; > + }; > + core1 { > + cpu = <&A53_1>; > + }; > + core2 { > + cpu = <&A53_2>; > + }; > + core3 { > + cpu = <&A53_3>; > + }; > + }; > + }; > + > + idle-states { > + entry-method = "psci"; > + > + CPU_SLEEP_0: cpu-sleep-0 { > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x0010000>; > + local-timer-stop; > + entry-latency-us = <300>; > + exit-latency-us = <1200>; > + min-residency-us = <2000>; > + }; > + > + CLUSTER_SLEEP_0: cluster-sleep-0 { > + compatible = "arm,idle-state"; > + arm,psci-suspend-param = <0x1010000>; > + local-timer-stop; > + entry-latency-us = <400>; > + exit-latency-us = <1200>; > + min-residency-us = <2500>; > + }; > + }; > + > + A72_0: cpu@0 { > + compatible = "arm,cortex-a72"; > + reg = <0x0 0x0>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xc000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&A72_L2>; > + clocks = <&scpi_dvfs 0>; > + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <450>; > + }; > + > + A72_1: cpu@1 { > + compatible = "arm,cortex-a72"; > + reg = <0x0 0x1>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0xc000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <256>; > + next-level-cache = <&A72_L2>; > + clocks = <&scpi_dvfs 0>; > + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; > + capacity-dmips-mhz = <1024>; > + dynamic-power-coefficient = <450>; > + }; > + > + A53_0: cpu@100 { > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x100>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&A53_L2>; > + clocks = <&scpi_dvfs 1>; > + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; > + capacity-dmips-mhz = <485>; > + dynamic-power-coefficient = <140>; > + }; > + > + A53_1: cpu@101 { > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x101>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&A53_L2>; > + clocks = <&scpi_dvfs 1>; > + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; > + capacity-dmips-mhz = <485>; > + dynamic-power-coefficient = <140>; > + }; > + > + A53_2: cpu@102 { > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x102>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&A53_L2>; > + clocks = <&scpi_dvfs 1>; > + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; > + capacity-dmips-mhz = <485>; > + dynamic-power-coefficient = <140>; > + }; > + > + A53_3: cpu@103 { > + compatible = "arm,cortex-a53"; > + reg = <0x0 0x103>; > + device_type = "cpu"; > + enable-method = "psci"; > + i-cache-size = <0x8000>; > + i-cache-line-size = <64>; > + i-cache-sets = <256>; > + d-cache-size = <0x8000>; > + d-cache-line-size = <64>; > + d-cache-sets = <128>; > + next-level-cache = <&A53_L2>; > + clocks = <&scpi_dvfs 1>; > + cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>; > + capacity-dmips-mhz = <485>; > + dynamic-power-coefficient = <140>; > + }; > + > + A72_L2: l2-cache0 { > + compatible = "cache"; > + cache-size = <0x200000>; > + cache-line-size = <64>; > + cache-sets = <2048>; > + }; > + > + A53_L2: l2-cache1 { > + compatible = "cache"; > + cache-size = <0x100000>; > + cache-line-size = <64>; > + cache-sets = <1024>; > + }; > + }; > + > + pmu-a72 { > + compatible = "arm,cortex-a72-pmu"; > + interrupts = <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-affinity = <&A72_0>, > + <&A72_1>; > + }; > + > + pmu-a53 { > + compatible = "arm,cortex-a53-pmu"; > + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-affinity = <&A53_0>, > + <&A53_1>, > + <&A53_2>, > + <&A53_3>; > + }; > +}; > + > +&memtimer { > + status = "okay"; > +}; > + > +&pcie_ctlr { > + status = "okay"; > +}; > + > +&smmu_pcie { > + status = "okay"; > +}; > + > +&etm0 { > + cpu = <&A72_0>; > +}; > + > +&etm1 { > + cpu = <&A72_1>; > +}; > + > +&etm2 { > + cpu = <&A53_0>; > +}; > + > +&etm3 { > + cpu = <&A53_1>; > +}; > + > +&etm4 { > + cpu = <&A53_2>; > +}; > + > +&etm5 { > + cpu = <&A53_3>; > +}; > + > +&big_cluster_thermal_zone { > + status = "okay"; > +}; > + > +&little_cluster_thermal_zone { > + status = "okay"; > +}; > + > +&gpu0_thermal_zone { > + status = "okay"; > +}; > + > +&gpu1_thermal_zone { > + status = "okay"; > +}; > + > +&etf0_out_port { > + remote-endpoint = <&csys2_funnel_in_port0>; > +}; > + > +&replicator_in_port0 { > + remote-endpoint = <&csys2_funnel_out_port>; > +}; > + > +&csys1_funnel_in_port0 { > + remote-endpoint = <&stm_out_port>; > +}; > + > +&stm_out_port { > + remote-endpoint = <&csys1_funnel_in_port0>; > +}; > + > +&cpu_debug0 { > + cpu = <&A72_0>; > +}; > + > +&cpu_debug1 { > + cpu = <&A72_1>; > +}; > + > +&cpu_debug2 { > + cpu = <&A53_0>; > +}; > + > +&cpu_debug3 { > + cpu = <&A53_1>; > +}; > + > +&cpu_debug4 { > + cpu = <&A53_2>; > +}; > + > +&cpu_debug5 { > + cpu = <&A53_3>; > +}; > diff --git a/configs/vexpress_aemv8a_juno_defconfig > b/configs/vexpress_aemv8a_juno_defconfig > index f6ff0e0a569..0d9914c32bf 100644 > --- a/configs/vexpress_aemv8a_juno_defconfig > +++ b/configs/vexpress_aemv8a_juno_defconfig > @@ -51,3 +51,4 @@ CONFIG_USB_EHCI_HCD=y > CONFIG_USB_EHCI_GENERIC=y > CONFIG_USB_OHCI_HCD=y > CONFIG_USB_OHCI_GENERIC=y > +CONFIG_DEFAULT_DEVICE_TREE="juno-r2"
