Hi Ivan, On Thu, 9 Dec 2021 at 06:11, Ivan Mikhaylov <[email protected]> wrote: > > From: Ivan Mikhaylov <[email protected]> > > Add the 'missing-msg' for blobs for more detailed output on missing system > firmware and SEBoot blobs. > > Signed-off-by: Ivan Mikhaylov <[email protected]> > --- > arch/arm/dts/k3-am65-iot2050-boot-image.dtsi | 5 +++++ > tools/binman/missing-blob-help | 11 +++++++++++ > 2 files changed, 16 insertions(+)
Reviewed-by: Simon Glass <[email protected]> nits below (I can fix when applying if you like?) > > diff --git a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi > b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi > index b0c758477d..4f0435cea5 100644 > --- a/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi > +++ b/arch/arm/dts/k3-am65-iot2050-boot-image.dtsi > @@ -19,6 +19,7 @@ > blob-ext@0x000000 { > offset = <0x000000>; > filename = "tiboot3.bin"; > + missing-msg = "iot2050-seboot"; > }; > > blob@0x080000 { > @@ -187,21 +188,25 @@ > blob-ext@0x6c0000 { > offset = <0x6c0000>; > filename = "sysfw.itb"; > + missing-msg = "iot2050-sysfw"; > }; > /* PG1 sysfw, advanced variant */ > blob-ext@0x740000 { > offset = <0x740000>; > filename = "sysfw.itb_HS"; > + missing-msg = "iot2050-sysfw"; > }; > /* PG2 sysfw, basic variant */ > blob-ext@0x7c0000 { > offset = <0x7c0000>; > filename = "sysfw_sr2.itb"; > + missing-msg = "iot2050-sysfw"; > }; > /* PG2 sysfw, advanced variant */ > blob-ext@0x840000 { > offset = <0x840000>; > filename = "sysfw_sr2.itb_HS"; > + missing-msg = "iot2050-sysfw"; > }; > }; > }; > diff --git a/tools/binman/missing-blob-help b/tools/binman/missing-blob-help > index dc2d9c9811..d7c0c6bf16 100644 > --- a/tools/binman/missing-blob-help > +++ b/tools/binman/missing-blob-help > @@ -18,6 +18,17 @@ scp-sunxi: > SCP firmware is required for system suspend, but is otherwise optional. > Please read the section on SCP firmware in board/sunxi/README.sunxi64 > > +iot2050-seboot: > +See the documentation for IOT2050 board. Your image missing SEBoot image is missing > +which is mandatory for board startup. Prebuilt SEBoot located at > +meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/tiboot3.bin. > + > +iot2050-sysfw: > +See the documentation for IOT2050 board. Your image missing system image is missing > +firmware which is mandatory for board startup. Prebuilt system firmware > +located at meta-iot2050/tree/master/recipes-bsp/u-boot/files/prebuild/ > +with sysfw prefix. > + > k3-rti-wdt-firmware: > If CONFIG_WDT_K3_RTI_LOAD_FW is enabled, a firmware image is needed for > the R5F core(s) to trigger the system reset. One possible source is > -- > 2.34.0 > Regards, Simon
