In the case of CONFIG_SYS_FDT_ADDR this was being used to modify the default value of fdt_addr / fdt_addr_r, which is not something to expose in this manner and is not otherwise done. The case of SYS_ENV_ADDR is similar but only done on the pic32mzdask platform, for scriptaddr.
Signed-off-by: Tom Rini <[email protected]> --- board/warp7/Kconfig | 6 ------ include/configs/pic32mzdask.h | 7 ++----- include/configs/warp7.h | 2 +- 3 files changed, 3 insertions(+), 12 deletions(-) diff --git a/board/warp7/Kconfig b/board/warp7/Kconfig index e5051cdda66a..05b4420afc82 100644 --- a/board/warp7/Kconfig +++ b/board/warp7/Kconfig @@ -14,12 +14,6 @@ config WARP7_ROOT_PART partition that is typically specified with root=/dev/sdaX or which gets converted into a root=PARTUUID=some_uuid. -config SYS_FDT_ADDR - hex "FDT load address" - default 0x83000000 - help - The address the FDT file should be loaded to. - config IMX_CONFIG default "board/warp7/imximage.cfg" diff --git a/include/configs/pic32mzdask.h b/include/configs/pic32mzdask.h index cc2e6a7ae89c..3624c122fcdb 100644 --- a/include/configs/pic32mzdask.h +++ b/include/configs/pic32mzdask.h @@ -33,9 +33,6 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_MONITOR_LEN (192 << 10) -#define CONFIG_SYS_ENV_ADDR 0x88300000 -#define CONFIG_SYS_FDT_ADDR 0x89d00000 - /* Memory Test */ /*---------------------------------------------------------------------- @@ -74,8 +71,8 @@ #define MEM_LAYOUT_ENV_SETTINGS \ "kernel_addr_r="__stringify(CONFIG_SYS_LOAD_ADDR)"\0" \ - "fdt_addr_r="__stringify(CONFIG_SYS_FDT_ADDR)"\0" \ - "scriptaddr="__stringify(CONFIG_SYS_ENV_ADDR)"\0" + "fdt_addr_r=0x89d00000\0" \ + "scriptaddr=0x88300000\0" \ #define CONFIG_LEGACY_BOOTCMD_ENV \ "legacy_bootcmd= " \ diff --git a/include/configs/warp7.h b/include/configs/warp7.h index da7c753ddd73..83ee1784ce91 100644 --- a/include/configs/warp7.h +++ b/include/configs/warp7.h @@ -39,7 +39,7 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "fdt_file=imx7s-warp.dtb\0" \ - "fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \ + "fdt_addr=0x83000000\0" \ "fdtovaddr=0x83100000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \ -- 2.25.1
