On Fri, 24 Dec 2021 at 06:44, Alper Nebi Yasak <[email protected]> wrote: > > This patch enables some configs that should be working on the Bob board, > based on what is observed to work on the Kevin board. > > The Bob board uses an Embedded DisplayPort panel compatible with the > simple panel and Rockchip eDP drivers. Its backlight is controlled by > the Chromium OS Embedded Controller Pulse Width Modulator. Enable these > for the board. > > Also set VIDEO_ROCKCHIP_MAX_{XRES,YRES} to 1280x800, the resolution of > its panel. This had to be done for the Kevin board, but it's untested if > this is actually necessary for Bob. > > The Rockchip video driver needs to assert/deassert some resets, so also > enable the reset controller. RESET_ROCKCHIP defaults to y for this board > when DM_RESET=y, so it's enough to set that. > > The Bob board has two USB 3.0 Type-C ports and one USB 2.0 Type-A port > on its right side. Enable the configs relevant to USB devices so these > can be used. This is despite a known issue with RK3399 boards where USB > de-init causes a hang, as there is a known workaround. > > Some other rk3399-based devices enable support for the SoC's random > number generator in commit a475bef5340c ("configs: rk3399: enable rng on > firefly/rock960/rockpro64"), as it can provide a KASLR seed when booting > using UEFI. Enable it for Bob as well. > > The default misc_init_r() for Rockchip boards sets cpuid and ethernet > MAC address based on e-fuse block. A previous patch extends this on Gru > boards to set registers related to SoC IO domains as is necessary on > these boards. Enable this function and configs for it on Bob. > > The microSD card slot on this board (and others based on Gru) is > connected to a GPIO controlled regulator (ppvar-sd-card-io), which must > be operable by U-Boot. Enable the relevant config option to allow this. > > Bob boards also use the Winbond W25Q64DW SPI flash chip, enable support > for Winbond SPI flash chips in the board config so U-Boot can boot with > this chip. > > Signed-off-by: Alper Nebi Yasak <[email protected]> > Reviewed-by: Kever Yang <[email protected]> > --- > > Changes in v3: > - Unset configs MMC_IO_VOLTAGE, MMC_UHS_SUPPORT, MMC_HS400_SUPPORT, > MMC_HS400_ES_SUPPORT, MMC_SDHCI_SDMA. > - Add tag: "Reviewed-by: Kever Yang <[email protected]>" > > configs/chromebook_bob_defconfig | 22 +++++++++++++++++++++- > include/configs/gru.h | 3 +++ > 2 files changed, 24 insertions(+), 1 deletion(-) >
Reviewed-by: Simon Glass <[email protected]> Tested on bob, kevin Tested-by: Simon Glass <[email protected]>
