Hi, Thanks for your reply
2010/11/19 Premi, Sanjeev <pr...@ti.com>: >> -----Original Message----- >> From: u-boot-boun...@lists.denx.de >> [mailto:u-boot-boun...@lists.denx.de] On Behalf Of Enric >> Balletbò i Serra >> Sent: Friday, November 19, 2010 2:42 PM >> To: u-boot@lists.denx.de; Steve Sakoman >> Subject: [U-Boot] AM/DM37X How to configure registers to get 1000MHz >> >> Hi all, >> >> I would ask a question, maybe someone can help, which is the better >> way to configure the PRCM registers to get 1000MHz on AM/DM37X >> processor ? > > You need set the multipliers and dividers apprioriately - based on the > sysclk. > > Would help to understand the context of "better"? I'm thinking in two scenarios : 1. For OMAP35X there are devices that support 600MHz as max frequency but others supports 720MHz, I want to set by default 600MHz and if device supports 720MHz change to this frequency. 2. For AM/DM37X, maybe I'm wrong, but the default frequency for AM/DM37X is set to 600MHz, Like OMAP35X i want to set default to 800MHz and i device supports change to 1000MHz. Which is the better way to do this ? Thanks in advance, Enric > > ~sanjeev > >> >> Thanks in advance, >> Enric >> _______________________________________________ >> U-Boot mailing list >> U-Boot@lists.denx.de >> http://lists.denx.de/mailman/listinfo/u-boot >> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot